Which statement is true regarding static routes?
A.
Static routes are capable of resolving next hops that are not directly connected without any
special configuration.
B.
Static routes are capable of resolving next hops that are not directly connected, but they require
that resolve be configured.
C.
Static routes are capable of resolving next hops that are not directly connected only if the next
hop was learned by a dynamic routing protocol.
D.
Static routes are not capable of resolving next hops that are not directly connected.
but NO!It’s FALSE. The correct answer is B!!
Answer B is correct as Stan says.
agree, only B answer is correct
CORRECT ANSWER: B
C 🙂
http://forums.juniper.net/t5/Routing/Explanation-of-the-resolve-keyword-in-static-route/td-p/134271
By default, static routes can point only to a directly connected next hop. You can configure an IPv4 route to a prefix that is not directly connected by resolving the route through the inet.0 and inet.3 routing tables. To configure an IPv4 static route to a prefix that is not a directly connected next hop, include the resolve statement:
– it means that you could configure any static route on direct connect IP only but if you want to make the next-hop of this static route on another router for example you couldn’t by default and need resolve so the router will look on the routing table for this next-hop and if exist so the route will be valid and could forward traffic
Regards,
Mohamed Elhariry
JNCIE-M/T # 1059, CCNP & CCIP
For me the correct is B. From the Official Juniper pdf:
“Indirect next hops can be resolved through another
static route or through a dynamic routing protocol”
That makes the answer C as incorrect because of the “only”
yes B
B
———————————————————————-
By default, the Junos OS requires that the next-hop IP address of static routes be reachable using a direct route. Unlike software
from other vendors, the Junos OS does not perform recursive lookups of next hops by default.
As illustrated in the graphic, you can alter the default next-hop resolution behavior using the resolve CLI option. In addition to the resolve CLI option, a route to the indirect next hop is also required. Indirect next hops can be resolved through another
static route or through a dynamic routing protocol. We recommend, whenever possible, that you use a dynamic routing protocol as your method of resolution. Using a dynamic routing protocol, rather than a static route to resolve indirect next hops,
dynamically removes the static route if the indirect next hop becomes unavailable.
JNCIA-Junos Study Guide—Part 2/Chapter 1: Routing Fundamentals /Resolving Indirect Next Hops/ PAGE-19
The correct answer here https://learningportal.juniper.net/juniper/user_activity_info.aspx?id=8406 was:
B
correct answer B
New JN0-102 Exam Questions Updated Recently (8/May/2017):
NEW QUESTION 358
Which two statements describe the default behavior for OSPF? (Choose two.)
A. OSPF imports all routes into the inet4.0 routing table.
B. OSPF exports all static routes into the OSPF database.
C. OSPF imports all routes into the inet.0 routing table.
D. OSPF does not export static routes into the OSPF database.
Answer: CD
NEW QUESTION 359
Which two ping command parameters whould be used to troubleshoot MTU issues? (Choose two.)
A. ping do-not-fragment
B. ping rapid
C. ping verbose
D. ping size
Answer: AD
NEW QUESTION 360
Which command prompt indicates that you are in operational mode?
A. user @ router &
B. user @ router #
C. user @ router $
D. user @ router >
Answer: D
NEW QUESTION 361
Which keystroke combination allows users to move the cursor to the beginning of the command line without deleting text?
A. Ctrl + u
B. Ctrl + w
C. Ctrl + a
D. Ctrl + b
Answer: C
NEW QUESTION 362
What is the subnet mask for the 172.45.32.6/19 address?
A. 255.255.224.0
B. 255.255.240.0
C. 255.224.0.0
D. 255.240.0.0
Answer: A
NEW QUESTION 363
……
A. ge-0/0/1.0
B. ge-0/0/0.0
C. ge-0/0/3.0
D. ge-0/0/2.0
Answer: A
NEW QUESTION 364
What is the default firewall filter behavior when a term is matched but no terminating action is specified?
A. an implicit deny and the filter evaluation terminates
B. an implicit accept and the filter evaluation terminates
C. an implicit accept and the filter evaluation continues to the next term
D. an implicit deny and the filter evaluation continues to the next term
Answer: C
NEW QUESTION 365
What are three interface prefixes for a 40-gigabit interface? (Choose three.)
A. et
B. es
C. fte
D. xe
E. xle
Answer: ABE
NEW QUESTION 366
Which source of routing information is preferred by default?
A. static
B. RIP
C. direct
D. BGP
Answer: C
NEW QUESTION 367
For the interface ge-1/2/3.4, what does “ge” represent?
A. SONET/SDH
B. Gigabit Ethernet
C. Aggregated Ethernet
D. GRE
Answer: B
NEW QUESTION 368
Which word starts a command to display the operational status of a Junos device?
A. put
B. set
C. show
D. get
Answer: C
NEW QUESTION 369
……
MORE
……
P.S. You Can Get The Newest JN0-102 Dumps In PDF And VCE From — http://www.passleader.com/jn0-102.html (408q VCE and PDF)
Good Luck!
By the way, part of the new 408Q JN0-102 dumps for your reference:
https://drive.google.com/open?id=0B-ob6L_QjGLpSmYwaTA1elptOUE
Best Regards!