Which protocol is an IGP?
A.
LACP
B.
STP
C.
OSPF
D.
PAGP
Explanation:
An interior gateway protocol (IGP) is a routing protocol that is used to exchange routing information within an autonomous system (AS).In contrast, an Exterior Gateway Protocol (EGP) is for determining network reachability between autonomous systems and makes use of IGPs to resolve routes within an AS.
The interior gateway protocols can be divided into two categories: 1) Distance-vector routing protocol and 2) Link-state routing protocol.
Type of Interior gateway protocols
Distance-vector routing protocol
Distance-vector routing protocols use the Bellman-Ford algorithm. In these protocols, each router does not possess information about the full network topology. It advertises its distance value (DV) calculated to other routers and receives similar advertisements from other routers unless changes are done in local network or by neighbours (Routers). Using these routing advertisements each router populates its routing table. In the next advertisement cycle, a router advertises updated information from its routing table. This process continues until the routing tables of each router converge to stable values.
Some of these protocols have the disadvantage of slow convergence.
Some examples of Distance Vector routing protocol are:
1. Routing Information Protocol (RIP)
2. Routing Information Protocol Version 2 (RIP)
3. Interior Gateway Routing Protocol (IGRP)Link-state routing protocol
In the case of Link-state routing protocols, each router possesses information about the complete network topology. Each router then independently calculates the best next hop from it for every possible destination in the network using local information of the topology. The collection of best next hops forms the routing table.
This contrasts with distance-vector routing protocols, which work by having each node share its routing table with its neighbors. In a link-state protocol, the only information passed between the nodes is information used to construct the connectivity maps.
Some examples of Link-State routing protocol are:
1. Open Shortest Path First (OSPF)
2. Intermediate system to intermediate system (IS-IS)