In transparent mode, you can create policies between which zones?
A.
V1-Trust and Untrust
B.
Private and L2-Public
C.
V1-Global and V1-Global
D.
V1-Trust and Private (L2)
E.
V1=Untrust and L2-Private
Explanation:
With transparent mode, the NetScreen firewall is converted from a layer 3 device to one that operates at layer 2, essentially becoming a layer 2 bridge. By doing so, the device can be deployed into existing infrastructures without requiring the readdressing that would be required for a routed solution.The IP addresses of the physical interfaces are set to 0.0.0.0/0 and truly make the deployment invisible to the user.
By default, ScreenOS creates one function zone, the VLAN zone, and three L2 security zones: V1-Trust, V1-Untrust, and V1-DMZ. A NetScreen device operating at Layer 2 (L2) does not permit any inter-zone or intra-zone traffic unless there is a policy configured on the device. Please note that a custom zone must start with a L2- prefix.