What could be causing the problem?

You want to configure the NetScreen Remote client to use a preshared key. You select the "My Identity" configuration screen but you cannot find the option. What could be causing the problem?(Exhibit)

You want to configure the NetScreen Remote client to use a preshared key. You select the “My Identity” configuration screen but you cannot find the option. What could be causing the problem?(Exhibit)

A.
You have to set the “Select Certificate” option to none

B.
You have to set the “ID type” option to Pre-Shared key

C.
NetScreen Remote does not support the use of Pre-Shared key

D.
“My identity” is not the right tab. It needs to be configured under the Security Proposal Section

Explanation:
The correct procedure to create a pre-shared key is the following:
1. Double-click the
NetScreen-Remote icon, located on the Windows taskbar, to open the Security Policy Editor. (My Identity and Security Policy icons appear in the Network Security Policy list.)
* Click My Identity. (The My Identity and Internet Interface areas appear to the right of the Network
Security Policy list, as shown below.)

* In the My Identity area, select None from the Select Certificate drop-down list.
* Click Pre-Shared Key. (The Pre-Shared Key dialog box appears, as shown below.)

* Click Enter Key to make the Pre-Shared Key field available.
* Type a key with a length between 8 and 58 characters. A longer key length results in stronger encryption.
1. Click OK to save the entry.



Leave a Reply 0

Your email address will not be published. Required fields are marked *