When configuring a NetScreen device in transparent mode, what is required to forward traffic?
A.
There must be at least one policy configured
B.
The VLAN1 interface must have manage-ip value set
C.
The VLAN1 interface must have an ip address configured
D.
The NetScreen device must have the transparent option set under admin options
Explanation:
With transparent mode, the NetScreen firewall is converted from a layer 3 device to one that operates at layer 2, essentially becoming a layer 2 bridge. By doing so, the device can be deployed into existing infrastructures without requiring the readdressing that would be required for a routed solution.The IP addresses of the physical interfaces are set to 0.0.0.0/0 and truly make the deployment invisible to the user.
By default, ScreenOS creates one function zone, the VLAN zone, and three L2 security zones: V1-Trust, V1-Untrust, and V1-DMZ. A NetScreen device operating at Layer 2 (L2) does not permit any inter-zone or intra-zone traffic unless there is a policy configured on the device.