which statement explains this problem?

Click the Exhibit button.
user @host> show bgp summary logical-system LSYS1
Groups : 11 Peers : 10 Down peers: 1
Table Tot. Paths Act Paths Suppressed History Damp State
Pending
inet.0 141 129 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Accepted/
Damped…
192.168.64.12 65008 11153 11459 0 26 3d
3:10:43 9/10/10/0 0/0/0/0
192.168.72.12 65009 11171 11457 0 26 3d
3:10:39 11/12/12/0 0/0/0/0
192.168.80.12 65010 9480 9729 0 27 3d
3:10:42 11/12/12/0 0/0/0/0
192.168.88.12 65011 11171 11457 0 25 3d
3:10:31 12/13/13/0 0/0/0/0192.168.96.12 65012 9479 9729 0 26 3d
3:10:34 12/13/13/0 0/0/0/0
192.168.10.12 65013 111689 11460 0 27 3d
3:10:46 9/10/10/0 0/0/0/0
192.168.11.12 65014 111688 11458 0 25 3d
3:10:42 9/10/10/0 0/0/0/0
192.168.12.12 65015 111687 11457 0 25 3d
3:10:38 9/10/10/0 0/0/0/0
192.68.11.12 650168 9478 9729 0 25 3d
3:10:42 9/10/10/0 0/0/0/0
192.168.13.12 65017 111687 11457 0 27 3d
3:10:30 9/10/10/0 0/0/0/0
192.168.16.12 65017 111687 11457 0 27 1w3d2h
Connect
user@host> show interfaces ge-0/0/7.0 extensive
Logical interface ge-0/0/7.0 (Index 76) (SNMP ifIndex 548) (Generation 141)
…
Security: Zone: log
Allowed host-inbound traffic : bootp dns dhcp finger ftp tftp ident-reset http https ike netconf ping reversetelnet reverse-ssh rloqin rpm rsh snmp
snmp-trap ssh telnet traceroute xnm-clear-text xnm-ssl lsping ntp sip
r2cp
Flow Statistics:
Flow Input statistics:
Self packets: 0
ICMP packets: 0
VPN packets: 0
Multicast packets: 0
Bytes permitted by policy: 0
Connections established: 0
Flow Output statistics:
Multicast packets: 0
Bytes permitted by policy: 0
Flow error statistics (Packets dropped due to):
Address spoofing: 0
Authentication failed: 0
Incoming NAT errors: 0
Invalid zone received packet: 0
Multiple user authentications: 0
Multiple incoming NAT: 0
No parent for a gate: 0
No one interested in self pakets: 0
No minor session: 0
No more sessions: 589723
No NAT gate: 0
No route present: 0
No SA for incoming SPI: 0
No tunnel found: 0
No session for a gate: 0
No zone or NULL zone binding 0
Policy denied: 0
Security association not active: 0
TCP sequence number out of window: 0
Syn-attack protection: 0
User authentication errors: 0
Protocol inet, MTU: 1500, Generation: 1685, Route table: 0
Flags: Sendbcast-pkt-to-re
Addresses, F1ags: Is-Preferred Is-Primary
Destination: 10.5.123/24, Local: 10.5.123.3, Broadcast:10.5.123.255, Generation: 156
Protocol multiservice, MTU: Unlimited, Generation: 1686, Route table: 0
Policer: Input: __default_arp_policer__
…
…
An SRX Series device has been configured with a logical system LSYS1. One of the BGP peers is down.
Referring to the exhibit, which statement explains this problem?