Refer to the Exhibit.
Referring to the exhibit, you want to configure Switch-1 to allow a user on interface ge-0/0/10 to
accommodate both voice and data traffic. Your phones and your switches are LLDP-MED
capable.
What is the minimal configuration that allows LLDP-MED to autoconfigure your phone’s voice
VLAN?
A.
set interfaces ge-0/0/10 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/10 unit 0 family ethernet-switching vlan members voice_vlan
set interfaces ge-0/0/10 unit 0 family ethernet-switching native-vlan-id data_vlan
set ethernet-switching-options voip interface ge-0/0/10.0 vlan voice_vlan
set protocols lldp-med interface ge-0/0/10.0
B.
set interfaces ge-0/0/10 unit 0 family ethernet-switching port-mode trunk
set interfaces ge-0/0/10 unit 0 family ethernet-switching vlan members voice_vlan
set interfaces ge-0/0/10 unit 0 family ethernet-switching native-vlan-id data_vlan
set ethernet-switching-options voip interface ge-0/0/10.0 vlan voice_vlan
set protocols lldp interface ge-0/0/10.0
C.
set interfaces ge-0/0/10 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/10 unit 0 family ethernet-switching vlan members data_vlan
set ethernet-switching-options voip interface ge-0/0/10.0 forwarding-class
assured-forwarding
set protocols lldp-med interface ge-0/0/10.0
D.
set interfaces ge-0/0/10 unit 0 family ethernet-switching port-mode access
set interfaces ge-0/0/10 unit 0 family ethernet-switching vlan members data_vlan
set ethernet-switching-options voip interface ge-0/0/10.0 vlan voice_vlan
set protocols lldp-med interface ge-0/0/10.0