— Exhibit –Local traffic capture on r1:
Address resolution is OFF.
Listening on ge-5/3/0.0, capture size 1514 bytes
22:16:33.610374 Out IP (tos 0xc0, ttl 1, id 34562, offset 0, flags [none], proto: OSPF (89), length:
76) 10.1.2.1 > 224.0.0.5: OSPFv2, Hello, length 56 [len 44]
Router-ID 1.1.1.1, Backbone Area, Authentication TypE. none (0)
Options [External, LLS]
Hello Timer 10s, Dead Timer 40s, Mask 255.255.255.252, Priority 128
LLS: checksum: 0xfff6, length: 3
Extended Options (1), length: 4
Options: 0x00000001 [LSDB resync]
[edit]
user@r1# run show ospf interface
Interface State Area DR ID BDR ID Nbrs
ge-5/3/0.0 PtToPt 0.0.0.0 0.0.0.0 0.0.0.0 0
lo0.1 DR 0.0.0.0 1.1.1.1 0.0.0.0 0
[edit]
user@r1# run show ospf neighbor
————————————————————————-Local traffic capture on r2:
Address resolution is OFF.
Listening on ge-5/3/1.0, capture size 1514 bytes
22:16:42.238030 Out IP6 (class 0xc0, hlim 1, next-header: OSPF (89), length: 36)
fe80::6687:88ff:fe6c:6769 > ff02::5: OSPFv3, Hello, length 36
Router-ID 2.2.2.2, Backbone Area
Options [V6, External, Router]
Hello Timer 10s, Dead Timer 40s, Interface-ID 0.0.0.1, Priority 128
Neighbor List:
user@r2# run show ospf interface
OSPF instance is not running
— Exhibit –Refer to the Exhibit.
Referring to the exhibit, routers r1 and r2 are connected to each other by interfaces ge-5/3/0 and
ge-5/3/1 respectively. They do not become OSPF neighbors.
Which two statements are true? (Choose two.)
A.
r1 is configured for OSPFv3.
B.
r1 is configured for OSPFv2.
C.
r2 is configured for OSPFv2.
D.
r2 is configured for OSPFv3.
Explanation: