{hold:node0}
user@host1> show chassis cluster status
Cluster ID. 1
Node Priority Status Preempt Manual failover
Redundancy group: 0 , Failover count: 0
node0 1 hold no no
node1 0 lost n/a n/a
{hold:node0}
user@host1> show configuration | no-more
system {
host-name host1;
root-authentication {
encrypted-password “$1$KI99zGk6$MbYFuBbpLffu9tn2.sI7l1”; ## SECRET-DATA
}
name-server {
172.16.10.100;
}
services {
ssh;
telnet;
web-management {
http;
}}
syslog {
user * {
any emergency;
}
file messages {
any any;
authorization info;
}
file interactive-commands {
interactive-commands any;
}}}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 10.210.14.131/26;
}}}
ge-0/0/8 {
unit 0 {
family inet {
address 172.16.1.1/24;
}}}
ge-0/0/9 {
unit 0 {
family inet {
address 172.16.10.1/24;
}}}}
security {
policies {
default-policy {
permit-all;
}}
zones {
functional-zone management {
interfaces {
ge-0/0/0.0;
}
host-inbound-traffic {
system-services {
ssh;
telnet;
ping;
traceroute;
http;
snmp;
}}}
security-zone Trust {
host-inbound-traffic {
system-services {
any-service;
}}
interfaces {
ge-0/0/9.0;
}}
security-zone Untrust {
host-inbound-traffic {
system-services {
any-service;
}}
interfaces {
ge-0/0/8.0;
}}}}
—————-
{hold:node1}
user@host2> show chassis cluster status
Cluster ID. 1
Node Priority Status Preempt Manual failover
Redundancy group: 0 , Failover count: 0
node0 0 lost n/a n/a
node1 1 hold no no
{hold:node1}
user@host2> show configuration | no-more
system {
host-name host2;
root-authentication {
encrypted-password “$1$KI99zGk6$MbYFuBbpLffu9tn2.sI7l1”; ## SECRET-DATA
}
name-server {
172.16.10.100;
}
services {
ssh;
telnet;
web-management {
http;
}}
syslog {
user * {
any emergency;
}
file messages {
any any;
authorization info;
}
file interactive-commands {
interactive-commands any;
}}}
interfaces {
ge-0/0/0 {
unit 0 {
family inet {
address 10.210.14.132/26;
}}}
ge-0/0/8 {
unit 0 {
family inet {
address 172.16.1.1/24;
}}}
ge-0/0/9 {
unit 0 {
family inet {
address 172.16.10.1/24;
}}}}
security {
policies {
default-policy {
permit-all;
}}
zones {
functional-zone management {
interfaces {
ge-0/0/0.0;
}
host-inbound-traffic {
system-services {
ssh;
telnet;
ping;
traceroute;
http;
snmp;
}}}
security-zone Trust {
host-inbound-traffic {
system-services {
any-service;
}}
interfaces {
ge-0/0/9.0;
}}
security-zone Untrust {
host-inbound-traffic {
system-services {
any-service;
}}
interfaces {
ge-0/0/8.0;
}}
}}
A user attempted to form a chassis cluster on an SRX240; however, the cluster did not form. While
investigating the problem, you see the output shown in the Above. What is causing the problem?
A.
The cluster IDs do not match.
B.
The configurations are not identical.
C.
The fxp0 interface is not configured.
D. The ge-0/0/0 interface is configured.