The perimeter security at targetcorp.com does not permit ICMP TTL-expired packets out.

home/root # traceroute www.targetcorp.com <http://www.targetcorp.com>

traceroute to www.targetcorp.com <http://www.targetcorp.com>

(192.168.12.18), 64 hops may, 40 byte packets

1 router.anon.com (192.13.212.254) 1.373 ms 1.123 ms 1.280 ms

2 192.13.133.121 (192.13.133.121) 3.680 ms 3.506 ms 4.583 ms

3 firewall.anon.com (192.13.192.17) 127.189 ms 257.404 ms 208.484 ms

4 anon-gw.anon.com (192.93.144.89) 471.68 ms 376.875 ms 228.286 ms

5 fe5-0.lin.isp.com (192.162.231.225) 2.961 ms 3.852 ms 2.974 ms

6 fe0-0.lon0.isp.com (192.162.231.234) 3.979 ms 3.243 ms 4.370 ms

7 192.13.133.5 (192.13.133.5) 11.454 ms 4.221 ms 3.333 ms

6 * * *

7 * * *

8 www.targetcorp.com <http://www.targetcorp.com> (192.168.12.18) 5.392

ms 3.348 ms 3.199 ms

Use the traceroute results shown above to answer the following question:

The perimeter security at targetcorp.com does not permit ICMP TTL-expired packets out.

home/root # traceroute www.targetcorp.com <http://www.targetcorp.com>

traceroute to www.targetcorp.com <http://www.targetcorp.com>

(192.168.12.18), 64 hops may, 40 byte packets

1 router.anon.com (192.13.212.254) 1.373 ms 1.123 ms 1.280 ms

2 192.13.133.121 (192.13.133.121) 3.680 ms 3.506 ms 4.583 ms

3 firewall.anon.com (192.13.192.17) 127.189 ms 257.404 ms 208.484 ms

4 anon-gw.anon.com (192.93.144.89) 471.68 ms 376.875 ms 228.286 ms

5 fe5-0.lin.isp.com (192.162.231.225) 2.961 ms 3.852 ms 2.974 ms

6 fe0-0.lon0.isp.com (192.162.231.234) 3.979 ms 3.243 ms 4.370 ms

7 192.13.133.5 (192.13.133.5) 11.454 ms 4.221 ms 3.333 ms

6 * * *

7 * * *

8 www.targetcorp.com <http://www.targetcorp.com> (192.168.12.18) 5.392

ms 3.348 ms 3.199 ms

Use the traceroute results shown above to answer the following question:

The perimeter security at targetcorp.com does not permit ICMP TTL-expired packets out.

A.
True

B.
False

Explanation:
As seen in the exhibit there is 2 registrations with timeout, this tells us that the firewall filters packets where the TTL has reached 0, when you continue with higher starting values for TTL you will get an answer from the target of the traceroute.



Leave a Reply 0

Your email address will not be published. Required fields are marked *