Consider the following commands and output on the local server: Also, consider the following
route table entry on a remote system: 192.168.2.0 192.168.1.200 UG 1 1 You must configure a
virtual switch to connect over net0 to the remote system. Select two commands that complete the
configuration.
A.
ipadm set-ifprop –p forwarding=on net0
B.
ipadn set-prop –p forwarding=on vnic2
C.
ipacim set-prop –p forwarding=on ipv4
D.
ipadm set-prop –p routing=on net0
E.
routeadm –ue ipv4-forwarding
F.
routeadm –ue ipv4-routing
A F