Review the storage pool information:
Choose the correct procedure to repair this storage pool.
A.
Shut the system down, replace disk c3t3d0, and boot the system. When the system is booted, execute the
zpool clear pool1 command.
B.
Shut the system down, replace disk c3t3d0, and boot the system. When the system is booted execute the
zpool online pool1 command.
C.
Shut the system down, replace disk c3t3d0, and boot the system. When the system is booted, execute the
zpool replace pool1 c3t3d0 command.
D.
Shut the system down, replace disk c3t3d0, and boot the system. When the system is booted, execute thezpool replace pool1 c3t3d0 c3t3d0 command.
Explanation:
You might need to replace a disk in the root pool for the following reasons:
The root pool is too small and you want to replace it with a larger disk
The root pool disk is failing. In a non-redundant pool, if the disk is failing so that the system won’t boot, you’ll
need to boot from an alternate media, such as a CD or the network, before you replace the root pool disk.
In a mirrored root pool configuration, you might be able to attempt a disk replacement without having to boot
from alternate media. You can replace a failed disk by using the zpool replace command.
Some hardware requires that you offline and unconfigure a disk before attempting the zpool replace operation
to replace a failed disk.
For example:
# zpool offline rpool c1t0d0s0
# cfgadm -c unconfigure c1::dsk/c1t0d0
<Physically remove failed disk c1t0d0>
<Physically insert replacement disk c1t0d0>
# cfgadm -c configure c1::dsk/c1t0d0
# zpool replace rpool c1t0d0s0
# zpool online rpool c1t0d0s0
# zpool status rpool
<Let disk resilver before installing the boot blocks>
SPARC# installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c1t0d0s0
x86# installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c1t9d0s0