Select the five tasks that need to be performed on the Automated Installer (AI) install server before setting up
the client.
A.
Create a local IPS repository on the AI Install server and start the repository server service, the publisher
origin to the repository file.
B.
Set up a IP address on the AI install server.
C.
The DHCP server must be enabled on the install server and must provide the DHCP service for the clients.
D.
DHCP must be available on the network for the Install server and the clients, but the install server does not
need to be the DHCP server.
E.
Download the AI boot image. The image must be the same version as the Oracle Solaris OS that you plan
to install on the client.
F.
Download the text install image into the IPS repository.
G.
Install the AI installation tools.
H.
Create the AI install service. Specify the path to the AI network boot image ISO file and the path where the
AI net image ISO file should be unpacked.
I.
Create the AI install service. Specify the path to the AI network boot image ISO file and the path to the IPS
repository.
Explanation:
B: Configure the AI install server to use a static IP address and default route.
D: The create-service command can set up DHCP on the AI install server. If you want to set up a separate
DHCP server or configure an existing DHCP server for use with AI. The DHCP server must be able to provide
DNS information to the systems to be installed.
E: An automated installation of a client over the network consists of the following high-level steps:
1. The client system boots over the network and gets its network configuration and the location of the install
server from the DHCP server.
2. The install server provides a boot image to the client.
3. Characteristics of the client determine which installation instructions and which system configuration
instructions are used to install the client.
4. The Oracle Solaris 11 OS is installed on the client, pulling packages from the package repository specified by
the installation instructions in the AI install service.
G: Install the AI tool set.
Use the installadm create-service command to create an AI install service. Give the service a meaningful
name, and specify the path where you want the service created. Specify the source of the network boot image
(net image) package or ISO file.
installadm create-service [-n svcname]
[-s FMRI_or_ISO] [-d imagepath]
-d imagepath
The imagepath is the location of the new install service. The install-image/solaris-auto-install package is
installed to this location, or the specified ISO file is expanded at this location.
Answer: BDFGI