Your mentor suggests using the dladm rename-link command to rename the network datalinks.
What are the two advantages of following this advice?
A.
It can clarify which network interface has what purpose.
B.
It can simplify specifying the network interface with the dladm modify-aggr command.
C.
It can simplify specifying the network interface with the dladm modify-bridge command.
D.
It can simplify IP filter rule changes if the network interface is replaced with a different type.
E.
It can prevent accidental deletion of the network interface with the dladm delete-phys command.
F.
It can prevent accidental deletion of the network interface configuration with the ipadm delete-addr
command.
Explanation:
A: To rename the bge0 link to mgmt0, enter the following command:
# dladm rename-link bge0 mgmt0
E: Consider that the bge0 device, whose link was named mgmt0 as shown in the previous example, needs to
be replaced with a ce0 device because of a hardware failure. The bge0 NIC is physically removed, and
replaced with a new ce0 NIC. To associate the newly added ce0 device with the mgmt0 configuration previously
associated with bge0, enter the following command:
# dladm rename-link ce0 mgmt0
Note: How to Rename a Datalink
Use this procedure if you want to change a datalink name to a customized name. For example, some of the
datalinks in upgraded system might have retained legacy hardware-based names and you want to change
these names to generic ones.
Note: dladm rename-link [-R root-dir] link new-link
Rename link to new-link. This is used to give a link a meaningful name, or to associate existing link
configuration such as link properties of a removed device with a new device.