A company has requested that a plan for Auto Deploy be built using VMware-recommended best practices for
networking.
Which two considerations adhere to VMware-recommended networking best practices for Auto Deploy?
(Choose two.)
A.
Using IPv4 as Auto Deploy will be able to boot hosts with a legacy BIOS.
B.
Using DHCP reservations for address allocations because providing fixed IP addresses through host
customization is not supported.
C.
Using VLANs on the management network as it offers increased performance while hosts are booting.
D.
Using IPv6 as Auto Deploy will be able to boot hosts with a legacy BIOS and UEFI.
E.
Using DHCP reservations for address allocations because providing fixed IP addresses through host
customization is not recommended.
Explanation:
http://pubs.vmware.com/vsphere-60/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc%
2FGUID-980D9E38-633E-4557-9144-AC422FA239C5.html
A, E – OK
A – OK
PXE booting with legacy BIOS firmware is possible only over IPv4. PXE booting with UEFI firmware is possible with either IPv4 or IPv6.
E – OK
Use DHCP reservations for address allocation. Fixed IP addresses are supported by the host customization mechanism, but providing input for each host is not recommended.
B – no OK
C – no OK
D – not OK
PXE booting with UEFI firmware is possible with either IPv4 or IPv6.
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.install.doc/GUID-980D9E38-633E-4557-9144-AC422FA239C5.html
Agreed, A & E
AE
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.install.doc/GUID-980D9E38-633E-4557-9144-AC422FA239C5.html
A & E – Correct.
D makes no sense! IPv6 for LEGACY boot???
Should use the correct link since this exam is for 6.5 not 6.0. And A & E are documented here.
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.install.doc/GUID-980D9E38-633E-4557-9144-AC422FA239C5.html
vSphere Auto Deploy and IPv6 (A correct)
Because vSphere Auto Deploy takes advantage of the iPXE infrastructure, if the hosts that you plan to provision with vSphere Auto Deploy are with legacy BIOS, the vSphere Auto Deploy server must have an IPv4 address. PXE booting with legacy BIOS firmware is possible only over IPv4. PXE booting with UEFI firmware is possible with either IPv4 or IPv6.
IP Address Allocation (E correct)
Use DHCP reservations for address allocation. Fixed IP addresses are supported by the host customization mechanism, but providing input for each host is not recommended.
New 2V0-622D Exam Questions Updated Recently (1/Nov/2017):
NEW QUESTION 6
Which system traffic type cannot be configured with Network I/O Control (NIOC) bandwith allocation?
A. Virtual SAN traffic
B. ESXi host Management traffic
C. vSphere Replication traffic
D. Software FCoE Adapter traffic
Answer: D
NEW QUESTION 7
Which is the minimum number of hosts required for a VMware vSAN cluster to be able to apply a vSAN RAID5 storage policy?
A. six hosts
B. three hosts
C. four hosts
D. five hosts
Answer: C
NEW QUESTION 8
Which three TCP/IP stacks are built in at the VMkernel level in vSphere 6.x? (Choose three.)
A. Fault Tolerance
B. vMotion
C. Provisioning
D. Management
E. Default
Answer: ABC
NEW QUESTION 9
In vSphere 6.5, a virtual machine is thinly-provisioned on a VMFS6 datastore. The administrator deleted a large file within the guest OS. The freed blocks in the datastore are no longer needed by the VM. Which feature in vSphere 6.5 allows the backing storage to automatically reclaim the freed blocks?
A. ATS
B. Defrag
C. UNMAP
D. Auto Reclaim
Answer: C
Explanation:
VAAI UNMAP was introduced in vSphere 5.0 to allow the ESXi host to inform the backing storage that files or VMs had be moved or deleted from a Thin Provisioned VMFS datastore. This allowed the backing storage to reclaim the freed blocks. There was no way of doing this previously, resulting in many customers with a considerable amount of stranded space on their Thin Provisioned VMFS datastores.
NEW QUESTION 10
A new virtual machine cannot reach its default gateway.
– The vSphere administrator checks that the virtual machine’s vmnic is connected to the correct portgroup, and that the portgroup is on the correct virtual switch.
– This is the only virtual machine on this portgroup.
– Other virtual machines that are on the host and connected to the same Distributed switch are running as normal.
– The Distributed Switch has only one uplink.
Which could be the cause of this issue?
A. Block All Ports has been selected on the Distributed Switch.
B. The wrong VLAN ID has been added to the portgroup.
C. The VLAN has not been configured in virtual machine hardware settings.
D. The physical adapter is down.
Answer: D
NEW QUESTION 11
Which two requirements must be met before enabling vSphere HA Application Monitoring for a virtual machine? (Choose two.)
A. VMware Tools must be installed on the VM.
B. The vSphere Guest SDK must be installed on the VMs needing Application Monitoring.
C. Application Monitoring requires that vCenter Server is linked to a working instance of vRealize Operations Manager and the End Points Operations agent has been installed on the guest.
D. Application Monitoring is only supported on Linux operating systems.
E. Application Monitoring is only supported on Windows operating systems.
Answer: AE
NEW QUESTION 12
Which is true when assigning global permissions in a single vSphere Single Sign-On domain in a multi-site configuration?
A. Users assigned global permissions will be able to access objects and solutions across all Single Sign-On domains in an organization.
B. Users assigned global permissions will be able to access objects and solutions only in the same Single Sign-On site.
C. Users assigned global permissions will have administrator access across all objects and solutions in a Single Sign-On domain.
D. Users assigned global permissions will be able to access objects and solutions within that Single Sign-On domain.
Answer: A
NEW QUESTION 13
During Fibre Channel adapter setup of a ESXi host, which configuration guideline should be considered?
A. Do not mix Fibre Channel adapter models to access the same LUN from a single host unless the default queue depth has been changed.
B. Do not mix Fibre Channel adapters from different vendors in a single host.
C. Use Fibre Channel adapters from different vendors in a single host.
D. Set the queue depth to 16 if using a mix of different vendors’ Fibre Channel adapters in all hosts in the cluster.
Answer: B
NEW QUESTION 14
For Virtual Machine Compatibility upgrade, a VM needs to be in which power state?
A. Maintenance mode
B. Suspended
C. Powered Off
D. Powered On
Answer: C
NEW QUESTION 15
Which component must be deployed before using encrypted virtual machines in a vSphere 6.5 environment?
A. vCenter Server must use CA signed certificates
B. a host with supported Trusted Platform Module
C. supported password vault
D. External Key Management Server
Answer: D
NEW QUESTION 16
……
P.S. These New 2V0-622D Exam Questions Were Just Updated From The Real 2V0-622D Exam, You Can Get The Newest 2V0-622D Dumps In PDF And VCE From — https://www.passleader.com/2v0-622d.html (140q VCE and PDF)
Good Luck!
BTW, some new 140Q VMWare 2V0-622D dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpQUtYaUMtSmlBUHM
Best Regards!
am I the only one who sees B and E are the same? word by word or its a typo error?
my bad – they are different
recommended vs supported