An NSX Edge Service Gateway has two interfaces:
Internal interface named Internal Access
— IP address = 10.10.10.1
— Network mask = 255.255.255.0
Uplink interface named Physical Uplink
— IP address = 20.20.20.1
— Network mask = 255.255.255.0
A vSphere administrator wants to add a SNAT rule to allow traffic from the internal network segment to access external resources via the uplink interface. Which
three steps should the vSphere administrator do to add the SNAT rule? (Choose three.)
A.
Apply the SNAT rule to the Internal Access interface.
B.
Select 10.10.10.1 as the translated source IP.
C.
Apply the SNAT rule on the Physical Uplink interface.
D.
Select 10.10.10.0/24 as the original subnet.
E.
Choose 20.20.20.2 as the translated source IP.
New 2V0-642 Exam Questions and Answers (17/Aug/2017 Updated):
NEW QUESTION 4
In a Cross-vCenter implementation, where is the Universal Control Cluster deployed and configured?
A. In each vCenter instance associated with the Cross-vCenter implementation.
B. In each prepared NSX cluster associated with the Cross-vCenter implementation.
C. In every vCenter instance associated with an NSX Manager.
D. In the vCenter instance associated with the Primary NSX Manager.
Answer: D
NEW QUESTION 5
What is one of the benefits of using logical switches in an NSX environment?
A. IP subnet definitions can be migrated into logical switches using the NSX Manager.
B. Quality of Service parameters are automatically configured in a logical switch.
C. The physical infrastructure is responsible for maintaining the logical switch broadcast tables.
D. The physical infrastructure is not constrained by MAC/FIB table limits.
Answer: C
NEW QUESTION 6
An application requires load balancing with minimal impact to network performance. An NSX administrator is deploying a load balancer to meet the stated requirements. Which load balancing engine should be deployed?
A. Layer 5
B. Layer 6
C. Layer 7
D. Layer 4
Answer: D
NEW QUESTION 7
Where does an administrator configure logging for the NSX Manager?
A. In the vSphere Web Client
B. In the NSX Manager GUI
C. In the NSX Manager command line interface (CLI)
D. In the vSphere Syslog Collector
Answer: B
NEW QUESTION 8
Which two networking and security components are contained m the backup configuration data of an NSX Manager backup file? (Choose two.)
A. vSphere Distributed Switch
B. Resource Pools
C. Edge Services Gateway
D. Grouping Objects
Answer: CD
NEW QUESTION 9
Which action is not an option for adding Virtual Machines to a Security Group?
A. Adding Virtual Machines to a Security Group and nesting it within another Security Group.
B. Defining Dynamic Membership in the Security Group.
C. Adding Virtual Machines to a Security Policy and associating it with a Security Group.
D. Selecting objects to include within a Security Group.
Answer: C
NEW QUESTION 10
An administrator is deploying NSX to secure the virtual environment. NSX Manager has been deployed and register with it. Which additional step is required before the distributed firewall is functional?
A. Configure VTEPs on each host
B. Perform host preparation on the cluster
C. Deploy the NSX Controller cluster
D. Enable Guest Introspection
Answer: C
NEW QUESTION 11
Which three NSX services are available for synchronization in a Cross-vCenter implementation? (Choose three.)
A. Spoofguard
B. Distributed Firewall
C. Edge Firewall
D. Logical Switch
E. Transport Zone
Answer: BDE
NEW QUESTION 12
Which NSX routing protocols offers the most flexible policy control when peering with the physical environment?
A. BGP
B. OSPF
C. ISIS
D. EIGRP
Answer: B
NEW QUESTION 13
Which service cannot be included in a Security Policy using Service Composer?
A. Endpoint Services
B. Firewall Rules
C. Virtual Private Network Services
D. Network Introspection Services
Answer: C
NEW QUESTION 14
An NSX administrator is creating a filter as shown below.
……
What would be the purpose of creating a filter?
A. To quickly add a new rule.
B. To temporarily filter traffic.
C. To quickly remove a rule.
D. To quickly identify rules.
Answer: B
NEW QUESTION 15
……
P.S. These New 2V0-642 Exam Questions Were Just Updated From The Real 2V0-642 Exam, You Can Get The Newest 2V0-642 Dumps In PDF And VCE From — https://www.passleader.com/2v0-642.html (285q VCE and PDF)
Good Luck!
By the way, part of new 285Q VMware 2V0-642 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpbVl3X1hXbUdteHc
Best Regards!
Thanks all helpful reviews!!!
Completed the VCP6-NV 2V0-642 exam recently! I got 77 questions in total and scored 90% (the passing score is 300 now)!
The 2V0-642 exam is a new exam for replacing the 2V0-641 exam, most of the exam topics are same as the 2V0-641, but there are also a lot of new objectives in the actual 2V0-642 test.
I recommend you to learn the new VCP6-NV 2V0-642 study guide carefully, knowing deeply of the new exam topics that are not available in the 2V0-641 exam.
And, I suggest you to learn the newest PassLeader 2V0-642 dumps, almost all questions are from it, though some answers may not 100% correct.
P.S. Part of that PL 2V0-642 dumps are available here FYI:
http://www.vmwaredump.com/category/network-virtualization-dumps/2v0-642-exam-dumps
Good Luck!!!