CORRECT TEXT
One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is
100MB. Now you required the size 500MB. Make successfully the size of that Logical Volume
500M without losing any data. As well as size should be increased online.
Answer:
Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard
disk partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as
Physical Extents (PE). As there are several other concepts associated with the LVM system, let’s
start with some basic definitions:
* Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical
volume is a standard primary or logical partition. It can also be a RAID array.
* Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized
PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
* Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
* Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home
and /var on an LV.
* Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most
of the commands that you’ll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv14. resize2fs /dev/vg0/lv1 à to bring extended size online.
5. Again Verify using lvdisplay and df -h command.