Which layer in the OSI model includes the cable and net…

Which layer in the OSI model includes the cable and network adapters?

Which layer in the OSI model includes the cable and network adapters?

A.
Physical

B.
Session

C.
Application

D.
Presentation

Explanation:
Reviewing the OSI Layers

Layer 1 covers cables, adapters, hubs, and patch-down panels.

Show Hint

Leave a Reply 7

Your email address will not be published. Required fields are marked *

Dinzel

Dinzel

>New 70-741 Exam Questions Updated Recently (21/Mar/2017):<

NEW QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients. Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer. You open the DHCP console as shown in the exhibit:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-11.jpg
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You activate the scope.
Does this meet the goal?

A. Yes
B. No

Answer: A
Explanation: technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

NEW QUESTION 2
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10. On Server1, you have the following zone configuration:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-21.jpg
You have the following subnets defined on Server1:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-22.jpg
You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation: technet.microsoft.com/en-us/library/dd421709(v=ws.10).aspx

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days. All client computers dynamically register their names in the contoso.com DNS zone on Server1. You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved. You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You run the dnscmd.exe command and specify the /AgeAllRecords parameter for the zone.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation: technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

NEW QUESTION 4
Hotspot Question
You network contains an Active Directory named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2016. Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2. The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1. Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-41.jpg
The DHCP scopes are configured as shown in the Scopes Exhibit:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-42.jpg
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-43.jpg

Answer:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-44.jpg
Explanation: technet.microsoft.com/en-us/library/dn268500(v=ws.11).aspx

NEW QUESTION 5
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address. Each network card connects to a different network segment. Server1 has an IPv4 scope named Scope1. You need to ensure that Server1 only uses one network card when leasing IP addresses in Scope1. What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: C
Explanation: technet.microsoft.com/en-us/library/cc770650(v=ws.11).aspx

NEW QUESTION 6
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients. Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer. You open the DHCP console as shown in the exhibit:
IMAGE: passleader.org/wp-content/uploads/2017/03/passleader-70-741-dumps-61.jpg
You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You start the DHCP Server service.
Does this meet the goal?

A. Yes
B. No

Answer: B
Explanation: technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

NEW QUESTION 7
Your company has a main office in London and a branch office in Seattle. The offices connect to each other by using a WAN link. In the London office, you have a Distributed File System (DFS) server named FS1 that contains a folder named Folder1. In the Seattle office, you have a DFS server named FS2. All servers run Windows Server 2016. You configure replication of Folder1 to FS2. Users in both offices frequently add files in Folder1. You monitor DFS Replication, and you discover excessive replication over the WAN link during business hours. You need to reduce the amount of bandwidth used for replication during business hours. The solution must ensure that the users can continue to save content to Folder1. What should you do?

A. Modify the quota settings on Folder1 on FS2.
B. Modify the properties of the replication group.
C. Configure the copy of Folder1 on FS2 as read-only.
D. Modify the replicated folder properties of Folder1 on FS1.

Answer: B

NEW QUESTION 8
……

P.S. Get The Newest 70-741 Dumps In PDF And VCE From — http://www.passleader.com/70-741.html (63q VCE and PDF)

Good Luck!

Reply

Waldemar Rooijer

Waldemar Rooijer

Passed the Networking with Windows Server 2016 70-741 test few days ago!!! Scored 8xx!!!

There were many scenario questions (YES/NO questions) (about Active Directory domain) in my actual 70-741 test.

Got new questions of DHCP server/IPv4, and new questions of DFS/Windows Server 2016/reduce the amount of bandwidth, and new questions of VMM/IPAM…etc.

Questions on this site MAY not enough for passing, SOME IMPORTANT QUESTIONS ARE NOT AVAILABLE HERE!

I do recommend you to learn the NEWEST & VALID PassLeader 70-741 dumps here:

https://drive.google.com/open?id=0B-ob6L_QjGLpRUl1Y0xaTTdfTjQ

(NEW VERSION!!!)

Good Luck!!!

Reply

Kristen Gero

Kristen Gero

New 70-741 Exam Questions Updated Recently (30/Nov/2017):

NEW QUESTION 77
You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1. You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address. You need to provide Internet connectivity for the client computers. What should you do?

A. On Server2, select the Internet and Internal network adapters and bridge the connections.
From the DHCP console on Server1, authorize Server2.
B. On Server1, stop the DHCP server.
On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).
C. On Server2 run the New-NetNat -Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet.
Configure Server1 to provide the 003 Router option of 131.107.0.10.
D. Install the Routing role service on Server2 and configure the NAT routing protocol.
Configure Server1 to provide the 003 Router option of 192.168.1.250.

Answer: B

NEW QUESTION 79
You have two Hyper-V hosts named Server1 and Server2 that run windows server 2012 R2. The servers are nodes in a failover cluster named Cluster1. You perform a rolling upgrade of the cluster nodes to Windows Server 2016. You need to ensure that you can implement the Virtual Machine Load Balancing feature. Which cmdlet should you use?

A. Update-ClusterFunctionalLevel
B. SetCauClusterRole
C. Update-ClusterNetWorkNameResource
D. Set-ClusterGroupSet

Answer: A

NEW QUESTION 82
You have a DHCP server named Server1 that runs Windows Server 2016. You have a single IP subnet. Server1 has an IPv4 scope named Scope1. Scope1 has an IP address range of 10.0.1.10 to 10.0.1.200 and a length of 24 bits. You need to create a second logical IP network on the subnet. The subnet will use an IP address range of 10.0.2.10 to 10.0.2.200 and a length of 24 bits. What should you do?

A. Create a second scope, and then create a superscope.
B. Create a superscope, and then configure an exclusion range in Scope1.
C. Create a new scope, and then modify the IPv4 bindings.
D. Create a second scope, and then run the DHCP Split-Scope Configuration Wizard.

Answer: A

NEW QUESTION 85
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Active Directory Users and Computers, you modify the Dial-in Properties of the user accounts.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 86
You have a server named Server1 that runs Windows Server 2016. Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet. You plan to use Server1 to provide Internet connectivity for client computers on the internal network. You need to configure Server1 as a network address translation (NAT) server. Which server role or role service should you install on Server1 first?

A. Network Controller
B. Web Application Proxy
C. Routing
D. DirectAccess and VPN (RAS)

Answer: C

NEW QUESTION 87
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2016 source files are located in Drive D.
Solution: You run the following cmdlet:
New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package Microsoft-NanoServer-SCVMM-Package -MediaPath D:\ -TargetPath C:\nano1\Nano1.wim -ComputerName Nano1 -Domainname contoso.com
Does this meet the goal?

A. Yes
B. NO

Answer: A

NEW QUESTION 88
Your network contains an Active directory forest named contoso.com. The forest has a Distributed File System (DFS) namespace named \\contoso.com\namespace1. The domain contains a file server named Server1 that runs Windows Server 2016. You create a folder named Folder1 on Server1. Which two cmdlets should you use? (Choose two.)

A. New-DfsnFolderTarget
B. Install-WindowsFeature
C. Grant-DfsnAccess
D. New-DfsnFolder
E. New-SmbShare

Answer: BC

NEW QUESTION 89
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput. VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS). You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

A. Set-NetAdapterRss
B. Set-NetAdapterRdma
C. Set-NetAdapterQos
D. Set-NetAdapterSriov

Answer: D

NEW QUESTION 90
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Server Manager, You modify the Access Policies on Server1.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 91
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers. The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range. A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network. You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network. Which cmdlet should you use?

A. New-NetNeighbor
B. New-NetRoute
C. Set-NetTcpSetting
D. Set-NetNeighbir

Answer: B

NEW QUESTION 92
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin. The London site contains a web server named Web1 that runs Windows Server 2016. You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 93
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices. You have a DHCP server named Server1 that has an IPv4 scope named Scope1. You need to prevent a client computer that uses the same name as an existing registration from updating the registration. What should you do?

A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4, run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.

Answer: F

NEW QUESTION 94
……

P.S. These New 70-741 Exam Questions Were Just Updated From The Real 70-741 Exam, You Can Get The Newest 70-741 Dumps In PDF And VCE From — https://www.passleader.com/70-741.html (111q VCE and PDF)

Good Luck!

Reply