Note: This question is part of a series of questions that use the same set of answer choices. An answer choice may be correct for more than one question in the series.
Your network contains a System Center 2012 Configuration Manager environment that contains six servers configured as shown in the following table. Server5 and Server6 are in the perimeter network, while Server1, Server2, Server3, and Server4 are in the internal network.
Administrators currently apply software updates to servers manually. You discover that Server4 was never updated. You need to centrally manage software updates for all of the servers by using configuration Manager. What should you do first?
A.
Install a management point on Server5.
B.
Configure IIS to support only HTTPS on Server6.
C.
Install a management point on Server2.
D.
Install Network Load Balancing (NLB) on Server3.
E.
Install an enrollment proxy point on Server6.
F.
Configure IIS to support only HTTP on Server3.
G.
Configure the Exchange connector on Server3.
H.
Install Network Load Balancing (NLB) on Server6.
I.
Install a PXE-enabled protected distribution point on Server5.
J.
Install the Windows Cluster service on Server3.
K.
Install a PXE-enabled protected distribution point on Server4.
L.
Install the Windows Cluster service on Server6.
M.
Install Windows Server Update Services (WSUS) on Server3.
N.
Install a protected distribution point on Server1.
O.
Install a software update point on Server3.
M
should be O, WSUS (m) alone doesn’t allow you to use sccm to manage update right?
The correct answer is M, take special note the way in which Microsoft is asking this question:
What should you do first?
M. Install Windows Server Update Services (WSUS) on Server3.
M.
Can’t use SCCM Software Update with no WSUS in infrastructure.
(O) when you create a software updated point it installs wsus services.this is what i found when reinstalling an update point on a site server , not to sure because using sccm 2012 sp1 and not sccm 2012 rtm
You need WSUS (M) and a SUP (O). M is correct because its the first thing you would do.
Passed 70-243 exam on 20/Feb/2016, many new questions, Microsoft have updated the 70-243 exam recently!
Please do not only rely on those free 70-243 exam dumps, new questions are not available and many answers are wrong.
I got the premium 70-243 exam dumps from (PDF and VCE dumps are available here: http://j.mp/1o8ivS7), all new questions are same as the real test, and answers have been corrected in it.
Do recommend and good luck to you all!
New 70-243 Exam Questions and Answers Updated Recently (22/May/2016):
NEW QUESTION 1
You create a new Active Directory user named User1. You create a new collection that contains ther servers in PS1 and PS2. You need to ensure that User1 can perform the following tasks in SP1 and SP2:
– Modify alrets
– Set maintainace windows
– Deploy application to servers
The solution must minimize the number of permission assigned to User1. What should you do?
A. Add User1 as an administrative user.
Assign the Full Administrator security role to User1.
Remove the Default security scopes of the type Collection from User1.
Add the new Collection to the scope of User1.
B. Add User1 as an administrative user.
Assign the Full Administrator security role to User1.
Remove all of the Collection scopes from User1.
Add the new Collection to the scope of User1.
C. Add User1 as an administrative user.
Assign the infrastructure security role to User1.
Remove the Default security scopes of the type Collection from User1.
Add the new Collection to the scope of User1.
D. Add User1 as an administrative user.
Assign Application Administrator security role to User1.
Remove all of the Collection scopes from User1.
Add the new Collection to the scope of User1.
Answer: D
NEW QUESTION 2
You have a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) stand-alone primary site that includes the servers configured as the following:
— Server name: Configuration
— Server1: Configuration Manager primary site server
— Server2: Microsoft SQL server 2012 SQL server reporting services (SSRS) reporting services point
You have a custom report named Report1. Report1 has one parameter that has default value. You need to ensure that users can run Report1. But they cannot modify the default value of the parameter. What should you do?
A. Upload a report model file to the report by using SSRS
B. Edit report by using the report Builder
C. Edit the report by using Business Intelligence Development Studio
D. Edit security of the report by using SSRS
Answer: D
NEW QUESTION 3
You have a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) site. You use Configuration manager to manage client computers and servers. You need to ensure that client computer administrator can manage only client computers, and server administrators can manage only servers. The solution must ensure that objects created by the client computers administrator are not visible to the server administrators. Which three actions should you perform before you add the administrator as configuration manager administrators?
A. Create a custom security role for the client computers and a custom security role for the servers
B. Add client computers administrators and the server administrators to the Domain group
C. Create a unique security scope for the client computer objects and a unique security scope for the server objects
D. Set the security scopes for the client computer objects and the server objects
E. Create a collection for the client computers and a collection for the servers
Answer: A
NEW QUESTION 4
You create a domain user named User1. The domain user are member of the local groups on ech client computer as described in the following:
— User: Local Group
— User1: Users
— User2: Administrators
— User3: Power Users
— User4: WinRMRmoteWMIUsers_
— User5: Remote Management Users
You plan to configure client Push installation. You need to configure the client push installation account. The solution must use the principle of least privilege. What should you do?
A. Configure User3 as the client Push installation account
B. Specify User5 as the manager of the Clients OU, and then configure User5 as the client push installation account
C. Add User1 to the Client Admins group, and then configure User1 as the client push installation account
D. Configure User1 as the client push installation account
Answer: C
NEW QUESTION 5
Drag and Drop Question
Your network contains a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) environment. Your company currently does not manage software updates. The company plans to use Configuration Manager to deploy updates to 600 client computers that run windows 8.1 Pro and 3000 client computers that run windows 8.1 Enterprise. You need to deploy updates to the client computers by using Configuration Manager. Which five action should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
IMAGE URL: examgod.com/plimages/b0395ff26f3c_AAD1/70-243-exam-dumps-51_thumb.png
Answer:
Scan all of the client computers – 3
Configure a software update point – 4
Synchronize software updates – 2
Create a software updates deployment – 5
Run the setup for windows server update services (WSUS) – 1
NEW QUESTION 6
Your company has a main office and a remote office. The main office has 3,000 users. The remote office has 600 users. You deploy System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) at the main office. You need to ensure that users at the remote office can use Configuration Manager to start bare metal installations of operating systems over the network. The solution must minimize the number of services deployed at the remote office. Which two features should you deploy at the remote office? Each correct answer presents part of the solution.
A. a state migration point
B. a server locator point
C. a PXE-enabled distribution point IS
D. a management point
E. Windows Deployment Services (WDS)
Answer: CD
NEW QUESTION 7
Hotspot Question
You have a system Center 2012 R2 Configuration Manager Service Pack1 (SP1) deployment that contains the servers configured as shown in the following:
IMAGE URL: examgod.com/plimages/b0395ff26f3c_AAD1/70-243-exam-dumps-71_thumb.jpg
You plan to deploy client computers by using the operating system deployment feature. You need to configure the environment to ensure that operating system can be deployed by using operating system deployment. What should you do? Select the appropriate options.
IMAGE URL: examgod.com/plimages/b0395ff26f3c_AAD1/70-243-exam-dumps-72_thumb.jpg
Answer:
Server 3 and open ports: 67, 68, 69 and 4011
NEW QUESTION 8
You manage a system Centre 2012 R2 Configuration Manager Service Pack1 (SP1) stand-alone primary site that includes the servers configured as shown in the following table:
IMAGE URL: examgod.com/plimages/b0395ff26f3c_AAD1/70-243-exam-dumps-81_thumb.jpg
You need to provide a user named User1 with the ability to run reports. What should you do?
A. On Server2, modify the permission of the reporting services folder by using Report Manager.
B. On Server2, modify the Configuration Report Users security role by using Report Managers.
C. On Server3, modify the database permission by using SQL server Management Studio.
D. On Server1, assign user1 a security role by using the Configuration Manager Console.
Answer: D
NEW QUESTION 9
……
P.S. These New 70-243 Exam Questions Were Just Updated From The Real 70-243 Exam, You Can Get The Newest 70-243 Dumps In PDF And VCE From — http://bit.ly/70-243-dumps-vce-pdf (154q)
Good Luck !!!
BTW, NEW 70-243 PDF Dumps from Google Drive for Free: https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc
Thank you all.
New 70-243 Exam Questions and Answers Updated Recently (11/July/2016):
NEW QUESTION 155
Hotspot Question
You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. The deployment contains the servers configured as shown in the following table.
Image URL: examgod.com/plimages/2492e53ce1fd_100B2/70-243-dumps-1551_thumb.jpg
You are troubleshooting the hardware inventory flow from a Windows 8.1 computer named Client1. You need to verify whether the following events have occurred:
– The inventory files were uploaded from Client1.
– The inventory data was added to the site database.
Which log should you verify for each event? To answer, select the appropriate options in the answer area.
Image URL: examgod.com/plimages/2492e53ce1fd_100B2/70-243-dumps-1552_thumb.jpg
Answer:
Image URL: examgod.com/plimages/2492e53ce1fd_100B2/70-243-dumps-1553_thumb.png
Explanation:
* Box 1:
MP_Hinv.log records details about the conversion of XML hardware inventory records from clients and the copy of those files to the site server.
* Box 2:
dataldr.log records information about the processing of Management Information Format (MIF) files and hardware inventory in the Configuration Manager database.
Is placed on the site server.
Incorrect:
* Invproc.log
Records the forwarding of MIF files from a secondary site to its parent site.
Is placed on the secondary site server.
* Datatransferservice.log
Records all BITS communication for policy or package access. This log is also used for content management by pull-distribution points.
Is placed on a computer that is configured as a pull-distribution point.
Relate Link: technet.microsoft.com/en-us/library/hh427342.aspx
NEW QUESTION 156
You have a server named Server1 that runs Windows Server 2012 R2. You plan to install System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) on Server1. You need to install the prerequisites on Server1. Which three features should you install from the Windows Assessment and Deployment Kit for Windows 8.1? Each correct answer presents part of the solution.
A. Deployment Tools
B. User State Migration Tool (USMT)
C. Application Compatibility Toolkit (ACT)
D. Windows Preinstallation Environment (Windows PE)
E. Windows Assessment Services
F. Microsoft SQL Server 2012 Express
G. Volume Activation Management Tool (VAMT)
H. Windows Performance Toolkit
Answer: ABD
Explanation:
When choosing the features to install make sure that you install at least the Deployment Tools, Windows Preinstallation Environment (Windows PE), and User State Migration Tool (USMIT). The screenshot does not show the addition of USMT ?but that is a requirement.
Image URL: examgod.com/plimages/2492e53ce1fd_100B2/70-243-dumps-1561_thumb.jpg
Relate Link: systemcentercentral.com/upgrading-configuration-manager-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/
NEW QUESTION 157
……
NEW QUESTION 158
Drag and Drop Question
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. You need to create a collection that excludes all of the client computers that have Microsoft Office 2013 installed. Which four actions should you perform in sequence to create the query for the collection? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Image URL: examgod.com/plimages/2492e53ce1fd_100B2/70-243-dumps-1581_thumb.jpg
Answer:
Image URL: examgod.com/plimages/2492e53ce1fd_100B2/70-243-dumps-1582_thumb.jpg
Explanation:
Select is not in as the operator – 4
Display the estimated execution plan
Create a query that returns all of the client computers that have Office 2013 installed – 1
Modify the query to use only indexed tables that are returned by the estimated execution plan – 3
Create a query-based collection that uses the sub selected values options
Browse to the query and select the query – 2
NEW QUESTION 159
You manage a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. In the Configuration Manager inventory, you need to include the desk number where each client computer is located. Which two actions should you perform? Each correct answer presents part of the solution.
A. On each computer, create a Noidmif.mif file.
B. Enable an existing hardware inventory class.
C. Modify the Default Client Settings.
D. Add an Asset Intelligence synchronization point.
E. On each computer, create an Idmif.mif file.
Answer: AB
Explanation:
How to Extend Hardware Inventory in Configuration Manager
A: Use NOIDMIF files to collect information about client devices that cannot be inventoried by Configuration Manager. For example, you might want to collect device asset number information that exists only as a label on the device. NOIDMIF inventory is automatically associated with the client device that it was collected from.
B: You can enable or disable the default inventory classes used by Configuration Manager or you can create custom client settings that allow you to collect different hardware inventory classes from specified collections of clients.
Relate Link: technet.microsoft.com/en-us/library/gg712290.aspx
NEW QUESTION 160
……
P.S. These New 70-243 Exam Questions Were Just Updated From The Real 70-243 Exam, You Can Get The Newest 70-243 Dumps In PDF And VCE From — http://bit.ly/70-243-dumps-vce-pdf (167q)
Good Luck !!!
BTW, NEW 70-243 PDF Dumps from Google Drive for Free: https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc
New 70-243 Exam Questions Updated Recently (6/Mar/2017):
NEW QUESTION 167
You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. Configuration Manager has Asset Intelligence enabled. You do not have an Asset Intelligence synchronization point. In the Configuration Manager Console, you discover that a number of Inventoried Software entries are listed in an uncategorized state. You need to change the state of the items that are listed as uncategorized. What are two possible ways to achieve the goal? Each correct answer presents a complete solution.
A. Assign a validated family to each entry.
B. Click Request Catalog Update for each entry.
C. Click ResolveConflict for each entry.
D. Assign a user-defined label for each entry.
E. Assign a user-defined family to each entry.
Answer: BE
Explanation:
B: To request a catalog update for uncategorized software titles:
– In the Configuration Manager console, clickAssets and Compliance.
– In the Assets and Compliance workspace, click Asset Intelligence, and then click Inventoried Software.
– Select a product name or select multiple product names, to be submitted to System Center Online for categorization. Onlyuncategorized inventoried software titles can be submitted to System Center Online for categorization.
– On Home tab, in the Product group, click Request Catalog Update.
Etc.
E: The Asset Intelligence validation state of uncategorized represents that a catalog item has not been defined by System Center Online researchers, the item has not been submitted to System Center Online for categorization, and the administrator has not assigned a user-defined categorization value.
To modify the categorizations for software titles:
– In the Configuration Manager console, click Assets and Compliance.
– In the Assets and Compliance workspace, click Asset Intelligence, and then click Inventoried Software.
– Select a software title or select multiple software titles for which youwant to modify categorizations.
– On the Home tab, in the Properties group, click Properties.
– On the General tab, you can modify the following categorization information:Product Name: Specifies the name of the inventoried software title.Vendor: Specifiesthe name of the vendor that developed the inventoried software title.Category: Specifies the software category that is currently assigned to the inventoried software title.Family: Specifies the software family that is currently assigned to the inventoried software title.
NEW QUESTION 168
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains a System Center 2012 Configuration Manager Service Pack 1(SP1) environment. You discover that information about installed applications fails to appear in the report named Software registered in Add Remove Programs on a specific client computer. You need to ensure that information about installed applications appears in the report. What should you do?
A. Modify the Enable hardwareinventory on clients setting.
B. Enable a default WMI class in the Hardware Inventory Classes list.
C. Modify the Enable software inventory on clients setting.
D. Add a file name to the Hardware Inventory configuration.
E. Add a WMI class to the HardwareInventory Classes list.
F. Add a file name to the Software Inventory configuration.
G. Add a file name to Software Metering.
H. Add a WMI class to the Sms_def.mof file.
I. Select Collect NOIDMIF files in Hardware Inventory.
Answer: C
NEW QUESTION 169
You have a test network that contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) deployment. You create an operating system deployment task sequence that deploys an image of Windows 8.1. You deploy the task sequence to the All Systems collection. You discover that client computers in the test environment are not being re-imaged automatically. You need to ensure that all of the client computers are re-imaged automatically. What should you do?
A. Modify the deployment verification settings for the site.
B. For the operating system deployment task sequence deployment, set the Make available to the following option to Only media and PXE.
C. For the operating system deployment task sequence deployment, set the Make available to the following options to Only Configuration Manager Clients.
D. Create a new operating system deployment task sequence deployment that uses a custom collection, and then set the purpose to Required.
Answer: D
NEW QUESTION 170
……
NEW QUESTION 171
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. You plan to refresh all of the client computers that run Windows 7 to Windows 8.1 by using Configuration Manager. You need to recommend a method to maintain the user state information after the refresh completes. What should you include in the recommendation?
A. Create a task sequence that copies the C:\Users folder to the server that runs Microsoft SQL Server.
B. Createa WIM image of all the client computers before the refresh.
C. Create and configure a state migration point.
D. Create a task sequence to rundism.exeon the client computers before the refresh.
Answer: C
NEW QUESTION 172
……
NEW QUESTION 173
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. You discover that the last logon user details are not being updated for all of the client computers. You need to ensure that the last logon user details are updated. Which Configuration Manager discovery method should you use?
A. Active Directory User Discovery
B. Network Discovery
C. Heartbeat Discovery
D. Active Directory System Discovery
Answer: C
NEW QUESTION 174
You have a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) stand-alone primary site. You have an administrator named Admin1. You discover that Admin1 can create collections that contains servers, laptops, and desktop computers. You create a collection named Collection1. Collection1 contains only desktop computers on the network. You need to ensure that Admin1 can create only collections that contain desktop computers. Which settings should you modify?
A. Security Scopes for Admin1
B. Membership Rules for Collection1
C. Security Roles for Admin1
D. Security for Collection1
Answer: A
NEW QUESTION 175
Your network contains a System Center 2012 R2 Configuration Manager Service Pack 1 (SP1) environment. The environment contains a primary site server named Server1 and a server named Server2 that runs Microsoft SQL Server 2012. Server2 contains the Configuration Manager database. Server2 fails. You install SQL Server 2012 on a new server. You name the server Server3. You need to restore the Configuration Manager database to Server3. What should you do?
A. Register the Service Principal Name (SPN) for the SQL Server service account of Server3. From Server1, run the Configuration Manager Setup Wizard.
B. From Server3, run Microsoft SQL Server Managements Studio, and then restore the backed up SQL Server database and log files.
C. Register the Service Principal Name (SPN) for the SQL Server Service account of Server3. From Server1, run the Site Repair Wizard.
D. From Server3, run Microsoft SQL Server Management Studio, and then attach the backed up SQL Server database and log files.
Answer: A
NEW QUESTION 176
……
P.S. These New 70-243 Exam Questions Were Just Updated From The Real 70-243 Exam, You Can Get The Newest 70-243 Dumps In PDF And VCE From — http://www.passleader.com/70-243.html (185q VCE and PDF)
Good Luck!
And, Part of that new 185Q 70-243 dumps FOR YOUR REFERENCE:
https://drive.google.com/open?id=0B-ob6L_QjGLpfmVaZDlXWUtVTTZVWWQ1Z3ZHdk1Gb0pBbWN4V2VOclZqcnFaUk5udTRUeGc
Best Regards!
Here’s the updated version of the new batch of exams from March 2017, for whoever still hasn’t done this exam.
http://optimumfiles.com/SystemCenter2012Config
The best and most Microsoft System Center 2012 Configuration 70-243 dumps pdf files and vce youtube demo shared free update. High quality Microsoft System Center 2012 Configuration 70-243 dumps exam training materials and study guides free download from lead4pass. “Administering and Deploying System Center 2012 Configuration Manager” is the name of Microsoft System Center 2012 Configuration https://www.lead4pass.com/70-243.html exam dumps which covers all the knowledge points of the real Microsoft exam. Latest Microsoft System Center 2012 Configuration 70-243 dumps exam practice questions and answers update, pass Microsoft 70-243 exam test easily at first try.
QUESTION 1
Your network contains a System Center 2012 Configuration Manager environment.
In Default Client Agent Settings, you enable Hardware Inventory and Software Inventory.
You discover that a group of client computers fails to report software inventory data.
The client computers report hardware inventory data.
You confirm that Configuration Manager can deploy Applications to the group of client computers.
You need to identify what is causing the reporting issue.
Which log files should you review? (Choose all that Apply.)
A. Filesystemfile.log
B. Dataldr.log
C. Mp_sinv.log
D. Inventoryagent.log
E. Hman.log
Correct Answer: ACD
QUESTION 2
Your company has a production network and a test network.
Both networks have System Center 2012 Configuration Manager deployed. You create the following objects on the test network:
A configuration item named SQLServerCI
A configuration baseline named SQLServerBaseline that contains the configuration item
A collection named SQLServers that contains all of the servers on the test network that run Microsoft SQL Server.
You export the configuration baseline to SQLServerBaseline.cab.
You open the Configuration Manager console, you click Assets and Compliance, and then you expand Compliance Settings.
You need to apply the configuration baseline to the servers on the production network that run SQL Server.
You create a collection named SQLServers that contains all SQL Servers from the production network.
What should you do next? (Choose all that apply.)
A. Right-click SQLServersBaseline, select Categorize, and then select Server.
B. Right-click SQLServerCI, select Export, and then specify SQLServer Baseline.cab as the export file.
C. Right-click SQLServersBaseline, select Deploy, and then select the SQLServers collection.
D. Right-click Configuration Baselines, and then select Import Configuration Data
E. Right-click SQLServersBaseline, and then select Properties. In the Deployments tab, type SQLServers in the Filter… box.
Correct Answer: CD
QUESTION 3
You recently migrated from System Center Configuration Manager 2007 to System Center 2012 Configuration Manager.
Your network contains a client computer that runs the 64-bit version of Windows 7 and the 32-bit version ofWindows 7.
Some client computers have the Microsoft Application Virtualization (App-V) client installed.
You have an Application named App1. 70-243 dumps
You have a 64-bit version of App1, a 32-bit version of App1, and a virtual version of App1. You need to deploy the Application to all of the client computers.
The solution must minimize the amount of administrative effort.
What should you do?
A. Create a new Application that has three different deployment types and create a target collection for each of the deployment types.
B. Create a new Application that has three different deployment types and configure global conditions for each of the deployment types.
C. Create a new package for each version of App1.
D. Create a new Application for each version of App1.
Correct Answer: B
QUESTION 4
Your network contains a System Center 2012 Configuration Manager environment.
You need to receive an email message every day that lists all non-compliant clients.
What should you do?
A. Create an alert subscription.
B. Configure a Microsoft SQL Server Reporting Services (SSRS) report.
C. Configure an in-console alert.
D. Create a ConfigMgr query.
Correct Answer: B
QUESTION 5
You enable Client Push.
You run Active Directory System Discovery.
You discover that some of the discovered computers do not have the System Center 2012 Configuration Manager client installed.
You need to identify why Client Push fails of the client computers.
Which log file should you review?
A. Locationservices.log
B. Smsexec.log
C. Ccm.log
D. Sdmagent.log
E. Dcmagent.log
F. Rcmctrl.log
G. Wsyncmgr.log
H. Ciagent.log
I. Hman.log
J. Contenttransfermanager.log
K. Sitestat.log
Correct Answer: C