Refer to the exhibit.
What is the problem when 237 dials 972551915?
A.
The problem is in “forward-digits 7”; the dial peer should be with “forward-digits 9.”
B.
The problem is in “forward-digits 7”; the dial peer should be with “forward-digits 5.”
C.
The problem is in “forward-digits 7”; the dial peer should be with “forward-digits 2.”
D.
The problem is in “forward-digits 7”; the dial peer should be with “forward-digits 8.”
Doesn’t a POTS dial-peer strip all specifically defined digits in a destination-pattern? If the leading 9 is not an access code but part of the dialed number, would that make A the desired answer?
i have the same question
A. The problem is in “forward-digits 7”; the dial peer should be with “forward-
digits 9
Why not forward digits all?
New 300-070 VCE Dumps:
https://drive.google.com/drive/folders/0B75b5xYLjSSNMzVucWVTMlQwMWc?usp=sharing
Jan/2018 New 300-070 Questions:
QUESTION
Employees at a company must dial 9 first to reach an external number. Which route pattern is used to route the call if a user dials the toll-free number 1-866-555-1212?
A. 9.18XX[2-9]XXXXXX
B. 9.18[0,5-8][0,5-8]XXXXXXX
C. 9.1XXXXXXXXXX
D. 9.1866XXXXXXX
E. 9.1866[2-9]XXXXXX
F. 9.1[2-9]XX[2-9]XXXXXX
Answer: E
QUESTION
Which three options can be used to configure digit manipulation for dial peers? (Choose three.)
A. digit translation rules
B. called party transformations
C. route partitions
D. forward digits
E. route patterns
F. digit stripping and prefixes
G. calling party transformations
Answer: ADF
Explanation:
QUESTION
Which two describe how media resources and audio streams operate with Cisco Unified Communications Manager? (Choose two.)
A. Audio streams are terminated differently depending on the signaling protocol, such as SCCP or SIP.
B. Audio streams are always terminated by media resources.
C. All media resources register with Cisco Unified Communications Manager.
D. There are no situations in which IP phone-to-IP phone audio streams will go directly between endpoints.
E. Signaling between Cisco Unified Communications Manager and hardware media resources uses the same protocol as the call-signaling type.
Answer: BC
QUESTION
You are a Network Engineer at ABC Company.
You want to ensure that when the contact center agent for the company makes an external call, the extension 897 654 300 is displayed. How do you resolve this issue?
A. Configure a Line Text Label on the Directory Number configuration page.
B. Configure an external phone number mask on the Directory Number configuration page.
C. Configure a translation pattern with the pattern 897654300.
D. Configure an external phone number mask on the Device configuration page.
Answer: B
QUESTION
The Cisco IP Phone of your company operator is on extension 7000. However, users normally dial 0 to get the operator. Which action sends calls that were made to 0 to the operator?
A. Create a route pattern of 0 and use a called party transform mask of 7XXX.
B. Create a translation pattern for 7000 and a called party transform mask of 0.
C. Create a translation pattern for 0 and a called party transform mask of 7000.
D. Create the IP phone overlay feature so the operator’s line has 0 and 7000 assigned to it.
E. Create a translation pattern for 0 and a calling party transform mask of 7000.
Answer: C
QUESTION
Which tool can you use to verify and troubleshoot a dial plan?
A. Audit Log Configuration
B. Dialed Number Analyzer
C. CDR Analysis and Reporting
D. Troubleshooting Trace Settings
Answer: B
QUESTION
A phone is assigned to a partition that is included in the CSS HQ-Phone. This partition contains a route pattern to block calls to service numbers 1-400-xxx-xxxx. When the engineer makes a test call to the number 1-400-400-9000 from that phone, the call goes through.
What is the reason for this issue?
A. The route pattern for the number to be blocked is in partition not accessible to the CSS.
B. The correct route list is not selected in the route pattern for the dialed number to be blocked.
C. The correct gateway is not selected for the route list for the route pattern for the dialed number to be blocked.
D. The route pattern for the number to be blocked is in “NULL” partition.
E. The route pattern is misconfigured.
Answer: C
QUESTION
Hackers are sending calls through a gateway router that is running SIP. The engineer blocks all SIP messages to the router except from their SIP server, which has an IP address of 208.177.10.1. The customer also must connect via SIP to their Cisco Expressway server with an IP address of 10.1.10.110. Which series of commands secures the router from the hackers?
A. voice service voip
voip security allow
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
B. voice service voip
ip address trusted list
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
C. voice service voip
allow-connections sip to sip
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
D. voice service voip
address-hiding
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
Answer: B
Explanation:
QUESTION
Which route pattern is the best match for the range of 6000 to 6599?
A. 65XX
B. 60XX
C. 6[05]XX
D. 6XXX
E. 6[0-5]
Answer: E
QUESTION
When the Cisco IOS router or gateway receives a call setup request, what is the PID value of the default dial peer?
A. ID:3
B. PID:6
C. PID:0
D. PID:4
E. PID:5
F. PID:1
G. PID:2
H. PID:7
Answer: C
Explanation:
QUESTION
Callers inform you that they hear a second dial tone after dialing the number 4085550123. Which dial-peer configuration command resolves this issue?
A. answer-address 408555….
B. destination-pattern 91[2-9]..[2-9]…..
C. forward-digits all
D. direct-inward-dial
Answer: D