Which three steps are needed to enable time-of-day call routing?

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/109588-tod-routing-example00.html
ime of the Day Routing: Working

Time Period: Defines a time frame in a 24 hours of a day.
Time Schedule:This is a collection of one or more time periods.
Partition:

More new 300-070 Questions:

QUESTION 154
Employees at a company must dial 9 first to reach an external number. Which route pattern is used to route the call if a user dials the toll-free number 1-866-555-1212?

A. 9.18XX[2-9]XXXXXX
B. 9.18[0,5-8][0,5-8]XXXXXXX
C. 9.1XXXXXXXXXX
D. 9.1866XXXXXXX
E. 9.1866[2-9]XXXXXX
F. 9.1[2-9]XX[2-9]XXXXXX

Answer: E

QUESTION 155
Which three options can be used to configure digit manipulation for dial peers? (Choose three.)

A. digit translation rules
B. called party transformations
C. route partitions
D. forward digits
E. route patterns
F. digit stripping and prefixes
G. calling party transformations

Answer: ADF
Explanation:

QUESTION 156
Which two describe how media resources and audio streams operate with Cisco Unified Communications Manager? (Choose two.)

A. Audio streams are terminated differently depending on the signaling protocol, such as SCCP or SIP.
B. Audio streams are always terminated by media resources.
C. All media resources register with Cisco Unified Communications Manager.
D. There are no situations in which IP phone-to-IP phone audio streams will go directly between endpoints.
E. Signaling between Cisco Unified Communications Manager and hardware media resources uses the same protocol as the call-signaling type.

Answer: BC

QUESTION 157
You are a Network Engineer at ABC Company.
You want to ensure that when the contact center agent for the company makes an external call, the extension 897 654 300 is displayed. How do you resolve this issue?

A. Configure a Line Text Label on the Directory Number configuration page.
B. Configure an external phone number mask on the Directory Number configuration page.
C. Configure a translation pattern with the pattern 897654300.
D. Configure an external phone number mask on the Device configuration page.

Answer: B

QUESTION 158
The Cisco IP Phone of your company operator is on extension 7000. However, users normally dial 0 to get the operator. Which action sends calls that were made to 0 to the operator?

A. Create a route pattern of 0 and use a called party transform mask of 7XXX.
B. Create a translation pattern for 7000 and a called party transform mask of 0.
C. Create a translation pattern for 0 and a called party transform mask of 7000.
D. Create the IP phone overlay feature so the operator’s line has 0 and 7000 assigned to it.
E. Create a translation pattern for 0 and a calling party transform mask of 7000.

Answer: C

QUESTION 159
Which tool can you use to verify and troubleshoot a dial plan?

A. Audit Log Configuration
B. Dialed Number Analyzer
C. CDR Analysis and Reporting
D. Troubleshooting Trace Settings

Answer: B

QUESTION 160
A phone is assigned to a partition that is included in the CSS HQ-Phone. This partition contains a route pattern to block calls to service numbers 1-400-xxx-xxxx. When the engineer makes a test call to the number 1-400-400-9000 from that phone, the call goes through.
What is the reason for this issue?

A. The route pattern for the number to be blocked is in partition not accessible to the CSS.
B. The correct route list is not selected in the route pattern for the dialed number to be blocked.
C. The correct gateway is not selected for the route list for the route pattern for the dialed number to be blocked.
D. The route pattern for the number to be blocked is in “NULL” partition.
E. The route pattern is misconfigured.

Answer: C

QUESTION 161
Hackers are sending calls through a gateway router that is running SIP. The engineer blocks all SIP messages to the router except from their SIP server, which has an IP address of 208.177.10.1. The customer also must connect via SIP to their Cisco Expressway server with an IP address of 10.1.10.110. Which series of commands secures the router from the hackers?

A. voice service voip
voip security allow
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
B. voice service voip
ip address trusted list
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
C. voice service voip
allow-connections sip to sip
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255
D. voice service voip
address-hiding
ipv4 208.177.10.1 255.255.255.255
ipv4 10.1.10.110 255.255.255.255

Answer: B
Explanation:

QUESTION 162
Which route pattern is the best match for the range of 6000 to 6599?

A. 65XX
B. 60XX
C. 6[05]XX
D. 6XXX
E. 6[0-5]

Answer: E

QUESTION 163
When the Cisco IOS router or gateway receives a call setup request, what is the PID value of the default dial peer?

A. ID:3
B. PID:6
C. PID:0
D. PID:4
E. PID:5
F. PID:1
G. PID:2
H. PID:7

Answer: C
Explanation:

QUESTION 164
Callers inform you that they hear a second dial tone after dialing the number 4085550123. Which dial-peer configuration command resolves this issue?

A. answer-address 408555….
B. destination-pattern 91[2-9]..[2-9]…..
C. forward-digits all
D. direct-inward-dial

Answer: D