Hot Area:

Come to share some new questions in my test(I have already passed ):

QUESTION
Hotspot Question
You have a server named Served that runs Windows Server 2016.
Server1 has the Windows Application Proxy role service installed.
You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.
image_thumb
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
image_thumb[1]
Answer:
image_thumb[2]

QUESTION
You need to create highly available storage spaces that connect to directly attached storage on the hosts.
Which cmdlet should you use?

A. Enable-Cluster Storage Spaces Dired
B. Set-Storage Pool
C. Add-Cluster Disk
D. Update-Cluster Virtual Machine Configuration

Answer: A

QUESTION
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first node cluster of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
image_thumb[3]
Answer:
image_thumb[4]

QUESTION
You have an application named App1.
App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
What should you include in the environment?

A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

Answer: D

QUESTION
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016.
All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices.
Which component should you install?

A. the Multipath I/O feature
B. the Routing role service
C. the Network Controller server role
D. the Canary Network Diagnostics feature
E. the Data Center Bridging feature

Answer: CE

QUESTION
Hotspot Question
You have an Active Directory domain named Contoso com.
The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have four virtual machines that are connected to an external switch.
The virtual machines are configured as shown.
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area
image_thumb[5]

image_thumb[6]
Answer:
image_thumb[7]

QUESTION
You have a server named Server1 that runs Windows Server 2016.
Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
image_thumb[8]
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1.
What should you do?

A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From the properties of the NIC team on VM1. change the load balancing of the NIC team.

Answer: A

QUESTION
Hotspot Question
You have a machine named VM1 that runs Windows Server 2016 VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network. Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
image_thumb[9]
Answer:
image_thumb[10]

QUESTION
Hotspot Question
You have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host. You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) – capable.
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which command should you run first? To answer, select the appropriate options in the answer area.
image_thumb[11]
Answer:
image_thumb[12]

QUESTION
You have a server named Server1 that runs Windows Server 2016.
You need to configure Server1 as a multitenant RAS Gateway.
What should you install on Server1?

A. the Network Policy and Access Services server role
B. the Remote Access server rote
C. the Data Center Bridging feature
D. the Network Controller server role

Answer: B

Detailed Answers Explanation and Questions Pics can be viewed here: http://www.microsoftebooks.net/?s=70-743&submit=Search