How should you configure the preauthentication method f…

Hotspot Question
You have a server named Server1 that runs Windows Server 2016. Server1 has the Web
Application Proxy role service installed. You need to publish Microsoft Exchange Server 2013
services through the Web Application Proxy. The solution must use preauthentication whenever
possible. How should you configure the preauthentication method for each service? (To answer,
select the appropriate options in the answer area.)

Hotspot Question
You have a server named Server1 that runs Windows Server 2016. Server1 has the Web
Application Proxy role service installed. You need to publish Microsoft Exchange Server 2013
services through the Web Application Proxy. The solution must use preauthentication whenever
possible. How should you configure the preauthentication method for each service? (To answer,
select the appropriate options in the answer area.)

Answer:

Explanation:
The following table describes the Exchange services that you can publish through Web Application
Proxy and the supported preauthentication for these services:

https://technet.microsoft.com/en-us/library/dn528827(v=ws.11).aspx



Leave a Reply 7

Your email address will not be published. Required fields are marked *


Frankw

Frankw

Exchange ActiveSync cán use ADFS Preauthentication since windows 2016.

Wylana

Wylana

@Frankw,

You are totally correct.
As seen here: https://docs.microsoft.com/en-us/windows-server/remote/remote-access/web-application-proxy/publishing-applications-with-sharepoint%2c-exchange-and-rdg

Exchange ActiveSync
Pass-through
AD FS using HTTP Basic authorization protocol

Dicky

Dicky

Agree:-
ADFS
Passthrough
ADFS

Pekah74

Pekah74

As it is pointed in Wylana’s linked article:
– Exchange ActiveSync AD FS
– Outlook Web App AD FS (non-claims-based, but anyway)
– Outlook Anywhere Pass-through

JoJo

JoJo

New 70-743 Exam Questions (1st/12/2017):

QUESTION 152
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Data Exchange integration service for VM1.
Does this meet the goal?

A. YES
B. NO

Answer: A

QUESTION 153
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2.
Does this meet the goal?

A. Yes
B. No

Answer: B

QUESTION 154
You have a Scale-Out File Server that has a share named Share1.
Share1 contains a virtual disk file named Disk1.vhd.
You plan to create a guest failover cluster.
You need to ensure that you can use the virtual disk as a shared virtual disk for the gust failover cluster.
Which cmdlet should you use?

A. Optimize VHD
B. Optimize VHDSet
C. Convert-VHD
D. Set-VHD

Answer: A

QUESTION 155
Scenario:
You are a network administrator for a company named Contoso,Ltd.
The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2.
Server2 has the following configured.
* Network address translation (NAT)
* The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You add a computer to subnet1. The computer has an IP address of 10.10.0.129
Web1 receives a request from the new computer and sends a response.
What should you do?

A. 10.10.0.129
B. 10.10.0.224
C. 131.107.0.223
D. 172.16.128.222

Answer: A

QUESTION 156
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You start the Hyper-V Guest Service Interface service on VM1.
Does this meet the goal?

A. YES
B. NO

Answer: A

QUESTION 157
You plan to deploy several Hyper-V hosts that run Windows Server 2016.
The deployment will use Software defined Networking (SDN) and VXLAN.
Which server role should you install on the network to support the planned deployment?

A. Network Controller
B. Network Policy and Access Services
C. Remote Access
D. Host Guardian Service

Answer: D

QUESTION 158
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to
18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, you modify the Network Policies on Server1.
Does this meet the goal?

A. Yes
B. No

Answer: A

QUESTION 159
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host.
The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage ­Edition Datacenter ­DeploymentType Host ­Package Mictosoft- NanoServer-SCVMM-Package ­MediaPath `D:\ -TargetPath C:\nano1\Nano1.wim ­ComputerName Nano1 ­Domaintiame Contoso.com
Does this meet the goal?

A. Yes
B. NO

Answer: A

QUESTION 160
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage ­Edition Datacenter ­DeploymentType Host ­Package Microsoft- NanoServer-Compute-Package ­MediaPath `D:\’ ­TargetPath C:\Nano1\Nano1.wim ­ComputerName Nano1 ­DomainName Contoso.com
Does this meet the goal?

A. Yes
B. NO

Answer: A

Full Version: https://drive.google.com/drive/folders/0B75b5xYLjSSNUVNnV1llcTVXV2M?usp=sharing

gardan

gardan

ADFS
ADFS
Pass-Through