Examine the output, and use the information you gather to answer the question.
How many phones will ring if a user dials extension 5001? (Select the best answer.)
A.
none
B.
one
C.
two
D.
three
Explanation:
One phone will ring if a user dials extension 5001 because only one IP phone has a line button that is
configured to use extension 5001. By contrast, both the phone associated with ephonedn 50 and the phone
associated with ephonedn 51 will ring when a user dials extension 5000 because both phones have buttonsthat are configured to use that extension. The following command set configures two phones to ring
simultaneously when a call is received on extension 5000:
ephonedn 50
number 5000
!
ephonedn 51
number 5001
!
ephone 20
button 1:50
!
ephone 21
button 1:51
button 2:50
You can configure which ephonedn is given preference by issuing the preference command in ephonedn
configuration mode. When multiple ephonedns are configured with the same extension number, the ephonedn
with the lowest preference value will receive the call. The preference can be set to a value from 0 to 10Íž an
ephonedn is set to a preference of 0 by default. An ephonedn with a preference of 0 is preferred over an
ephonedn with a preference of 1.https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr/
cme_p1ht.html#wp1403322580
New 210-060 Exam Questions and Answers Updated Recently (9/Jan/2018):
NEW QUESTION 238
A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
D. User Reports > Bills > Individual
Answer: D
NEW QUESTION 239
An engineer must ensure that user data is maintained in lightweight directory access protocol and copied to Cisco Unity Connection, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation option accomplishes this task?
A. bulk administration
B. import from CUCM via AXL
C. import from LDAP
D. manual creation
Answer: A
NEW QUESTION 240
An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator
Answer: D
NEW QUESTION 241
Which component allows Cisco Jabber to communicate with clients who are outside the corporate network?
A. Cisco Extension Mobility
B. Cisco TMS
C. Cisco Mobility Remote Destination
D. Cisco Unified RTMT
E. Cisco Mobile and Remote Access
Answer: A
NEW QUESTION 242
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
NEW QUESTION 243
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days. Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A
NEW QUESTION 244
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)
A. Survivable Remote Site Telephony is configured on the branch router.
B. LAN failover configuration is set to Survivable Remote Site Telephony.
C. Call Forward UnRegistered option is configured on each branch phone profile.
D. POTS WAN failover is set to Survivable Remote Site Telephony.
E. An ISDN is configured as a primary survivable backup site.
Answer: CE
NEW QUESTION 245
A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?
A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile.
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile.
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile.
D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile.
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
Answer: C
NEW QUESTION 246
A user reports that during calls they hear excessive hissing when neither party is talking. Which option is one cause of this noise?
A. QoS
B. LoPS
C. VAD
D. EPL
E. SRST
Answer: C
NEW QUESTION 247
What are three ways for an administrator to create users in Cisco Unity Connection? (Choose three.)
A. use the Bulk Administration Tool
B. import from Cisco Unified Communications Manager Express
C. import from a Microsoft Word document
D. import from an Adobe PDF document
E. use manual creation
F. import from a Microsoft Outlook contacts list
G. import from LDAP
Answer: ABG
NEW QUESTION 248
A user directory number is configured to forward all calls to a cell phone, but calls are not successfully forwarding. Which Cisco Unified Communications Manager setting requires reconfiguration?
A. DN External Mask
B. DN Route Partition
C. DN Calling Search Space
D. CFA Calling Search Space
Answer: D
NEW QUESTION 249
A network administrator wants a new employee to download the RTMT tool. Which menu option supports this function?
A. Bulk Administration > Job Scheduler > Plugins
B. Application > Plugins
C. Call routing > Plugins
D. Server > Region > Plugins
Answer: B
NEW QUESTION 250
Which two user attributes must be defined in Cisco Unity Connection before the users can be added? (Choose two.)
A. display name
B. alias
C. time zone
D. class of service
E. dial plan
Answer: DE
NEW QUESTION 251
……
P.S. These New 210-060 Exam Questions Were Just Updated From The Real 210-060 Exam, You Can Get The Newest 210-060 Dumps In PDF And VCE From — https://www.passleader.com/210-060.html (254q VCE and PDF)
Good Luck!
Besides, part of the new 254Q 210-060 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE
Best Regards!