Which of the following best describes Connection Reports Data Harvester? (Select the best answer.)
A.
It synchronizes existing users with LDAP directory services.
B.
It enables administrators to import or modify users by using CSV files.
C.
It is the service required for Unity Connection report generation.
D.
It is the feature that an administrator can use to automatically populate certain settings of a new user
account in Unity Connection.
Explanation:
Connection Reports Data Harvester is the service required for Cisco Unity Connection report generation. Unity
Connection reports can be accessed in Cisco Unified Serviceability, which enables an administrator to view
reports and manage other Cisco Unified Communications Manager (UCM) features. Unity Connection is a
voice messaging product that is typically installed as an appliance. Cisco Unified Serviceability is a
browserbased troubleshooting tool that uses Secure Hypertext Transfer Protocol (HTTPS) to access
information that is provided by other reporting tools, such as Cisco Unified RealTime Monitoring Tool (RTMT)
and Call Detail Records (CDR) Analysis and Reporting (CAR) tool.
The Connection Reports Data Harvester service allows data to be collected from log files and entered into the
Cisco Unified Serviceability Reports Archive, which holds information from which reports can be generated. You
can verify that the Connection Reports Data Harvester service is running by clicking Navigation > Cisco Unified
Serviceability from within the UCM graphical user interface (GUI) and then clicking Service Management from
the Tools menu. The Connection Reports Data Harvester service can be found under Optional Services. If the
service is deactivated, you can click Activate to turn it on.
The Bulk Administration Tool (BAT), not the Connection Reports Data Harvester, enables administrators to
import or modify users by using commaseparated values (CSV) files. For example, to use the BAT to modify
the voice mail message length limit, you could export the voice mail users to a CSV file, change the message
length limit value for each user in the CSV file, and then import the CSV file again. You can access the BAT by
clicking Tools> Bulk Administration Tool in the Unity Connection GUI.
The Cisco Directory Synchronization (DirSync) service, not the Connection Reports Data Harvester,
synchronizes existing Unity Connection users with Lightweight Directory Access Protocol (LDAP) directory
services, such as Microsoft Active Directory. To enable Unity Connection to synchronize with an LDAP
directory, you must select the Cisco DirSync check box in the Directory Services area of the Unity Connection
GUI. In addition, you can import new users from LDAP by either using the BAT to import a CSV file or by using
the Users > Import Users tool to import into Unity Connection LDAP information that was previously imported
into UCM. Because Unity Connection stores users locally, a user that is synchronized with Unity Connection
from LDAP will continue to be stored locally even if that user is later deleted from the LDAP database.
A user template, not the Connection Reports Data Harvester, is the feature that an administrator can use to
automatically populate certain settings of a new user account in Unity Connection. Templates are created in
Unity Connection by clicking Templates > User Templates and then clicking Add New. Next, you should choose
an existing template to use as the base for the new template. The template you choose as the base template
can be one of the Unity Connection default templates, such as the Voicemail User Template or the
Administrator Template, or a custom template that you have previously configured. The new template will
inherit all the settings of the base template except for settings that are unique to each template, such as the
template alias and display name.https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/7x/troubleshooting/guide/7xcuctsgx.pdf
New 210-060 Exam Questions and Answers (9/Jan/2018 Updated):
NEW QUESTION 238
A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
D. User Reports > Bills > Individual
Answer: D
NEW QUESTION 239
An engineer must ensure that user data is maintained in lightweight directory access protocol and copied to Cisco Unity Connection, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation option accomplishes this task?
A. bulk administration
B. import from CUCM via AXL
C. import from LDAP
D. manual creation
Answer: A
NEW QUESTION 240
An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator
Answer: D
NEW QUESTION 241
Which component allows Cisco Jabber to communicate with clients who are outside the corporate network?
A. Cisco Extension Mobility
B. Cisco TMS
C. Cisco Mobility Remote Destination
D. Cisco Unified RTMT
E. Cisco Mobile and Remote Access
Answer: A
NEW QUESTION 242
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
NEW QUESTION 243
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days. Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A
NEW QUESTION 244
IP WAN failure has occurred. Which two configurations must be made to allow calls to or from an IP phone at a branch location to complete to a destination outside of that branch? (Choose two.)
A. Survivable Remote Site Telephony is configured on the branch router.
B. LAN failover configuration is set to Survivable Remote Site Telephony.
C. Call Forward UnRegistered option is configured on each branch phone profile.
D. POTS WAN failover is set to Survivable Remote Site Telephony.
E. An ISDN is configured as a primary survivable backup site.
Answer: CE
NEW QUESTION 245
A voicemail user reports that he cannot access Cisco Unity Connection from the IP phone message button. Which option must you perform to resolve the problem?
A. In Cisco Unified Communications Manager, navigate to Advanced Features > Voicemail to confirm that the user has the correct voicemail profile.
B. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the device has the correct voicemail profile.
C. In Cisco Unified Communications Manager, navigate to Device > Phone to confirm that the directory number has the correct voicemail profile.
D. In Cisco Unified Communications Manager, navigate to User Management > End User to confirm that the user has the correct voicemail profile.
E. In Cisco Unity Connection, navigate to Users > Users to confirm that the user web password is correct.
Answer: C
NEW QUESTION 246
A user reports that during calls they hear excessive hissing when neither party is talking. Which option is one cause of this noise?
A. QoS
B. LoPS
C. VAD
D. EPL
E. SRST
Answer: C
NEW QUESTION 247
What are three ways for an administrator to create users in Cisco Unity Connection? (Choose three.)
A. use the Bulk Administration Tool
B. import from Cisco Unified Communications Manager Express
C. import from a Microsoft Word document
D. import from an Adobe PDF document
E. use manual creation
F. import from a Microsoft Outlook contacts list
G. import from LDAP
Answer: ABG
NEW QUESTION 248
A user directory number is configured to forward all calls to a cell phone, but calls are not successfully forwarding. Which Cisco Unified Communications Manager setting requires reconfiguration?
A. DN External Mask
B. DN Route Partition
C. DN Calling Search Space
D. CFA Calling Search Space
Answer: D
NEW QUESTION 249
A network administrator wants a new employee to download the RTMT tool. Which menu option supports this function?
A. Bulk Administration > Job Scheduler > Plugins
B. Application > Plugins
C. Call routing > Plugins
D. Server > Region > Plugins
Answer: B
NEW QUESTION 250
Which two user attributes must be defined in Cisco Unity Connection before the users can be added? (Choose two.)
A. display name
B. alias
C. time zone
D. class of service
E. dial plan
Answer: DE
NEW QUESTION 251
……
P.S. These New 210-060 Exam Questions Were Just Updated From The Real 210-060 Exam, You Can Get The Newest 210-060 Dumps In PDF And VCE From — https://www.passleader.com/210-060.html (254q VCE and PDF)
Good Luck!
By the way, part of the new 254Q 210-060 dumps are available here:
https://drive.google.com/open?id=0B-ob6L_QjGLpfnVuLUxTSlNxTUNBQ1N3SUstc29mY3JEOW9tZ1VXaFJwclpyU0l6NkhNZEE
Best Regards!
(9/Jan/2018 Updated) New 210-060 Exam Questions:
NEW QUESTION 238
A manager is generating bill reports for a particular user. Which navigation sequence must be used for this task?
A. Bills > Department
B. User Reports > Bills > Department
C. Bill > Individual
D. User Reports > Bills > Individual
Answer: D
NEW QUESTION 239
An engineer must ensure that user data is maintained in lightweight directory access protocol and copied to Cisco Unity Connection, but Cisco Unity Connection-specific data is locally maintained in the Cisco Unity Connection database. Which user creation option accomplishes this task?
A. bulk administration
B. import from CUCM via AXL
C. import from LDAP
D. manual creation
Answer: A
NEW QUESTION 240
An IT administrator must allow a customer service department supervisor to change or modify a recorded message on their phone system. Which role is needed to accomplish this?
A. Greeting Administrator
B. Recordings Administrator
C. Remote Administrator
D. Annunciator Administrator
Answer: D
NEW QUESTION 241
Which component allows Cisco Jabber to communicate with clients who are outside the corporate network?
A. Cisco Extension Mobility
B. Cisco TMS
C. Cisco Mobility Remote Destination
D. Cisco Unified RTMT
E. Cisco Mobile and Remote Access
Answer: A
NEW QUESTION 242
A voice engineer has installed an XML-based phone application from a third party and subscribed a user’s 7945 IP phone to the application. Which action does the user take to launch the new service on the IP phone?
A. Select the Applications button on the 7945 IP phone.
B. Select Settings > Applications.
C. Select Settings > Network > Applications.
D. Select the Services button on the 7945 IP phone.
Answer: D
NEW QUESTION 243
An administrator must keep CDR data for a longer period of time and wants to modify the configured value of the CDR/CMR Files Presentation Duration Days. Which menu options does the engineer navigate?
A. Unified CM Administration > System > Enterprise Parameters
B. Unified Serviceability > Tools > Serviceability Reports Archive
C. Unified CM Administration > Call Routing > Route Plan Report
D. Unified Serviceability > Tools > CDR Management
Answer: A