Which of the following ports can UCM use to communicate with an IP phone if the phone supports only SIP for
call signaling? (Select the best answer.)
A.
TCP port 2000
B.
UDP port 2427
C.
TCP or UDP port 5060
D.
TCP port 6970
E.
UCM will be unable to communicate with the IP phone.
Explanation:
Cisco Unified Communications Manager (UCM) can use Transmission Control Protocol (TCP) port 5060 or
User Datagram Protocol (UDP) port 5060 to communicate with an IP phone if the phone supports only Session
Initiation Protocol (SIP) for call signaling. The signaling conversation between UCM and an IP phone controls
many of the IP phone’s functions, such as call initiation, call termination, and call waiting notification. UCM can
have multiple, simultaneous signaling conversations with IP phones using different protocols. For example,
UCM can use SIP to communicate with one IP phone and use Skinny Client Control Protocol (SCCP) to
communicate with another IP phone on the same network. SCCP uses TCP port 2000.
UCM does not use UDP port 2427 or TCP port 6970 to communicate with an IP phone for call signaling. Media
Gateway Control Protocol (MGCP) uses UDP port 2427 for gateway control messages. IP phones can use TCP
port 6970 to download firmware and configuration files from UCM.https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/port/9_1_1/CUCM_BK_T2CA6EDE_00_tcp-portusage-guide-91/CUCM_BK_T2CA6EDE_00_tcp-port-usage-guide-
91_chapter_01.html#CUCM_TP_P019EF1A_00
QUESTION 136
A Cisco Unified Communications administrator wants to implement Cisco IM and Presence for the company. If it is installed in IM-only user mode, which three services are supported for users? (Choose three.)
A. video calls support
B. third-party XMPP client support
C. presence support
D. Microsoft Lync support
E. Microsoft Office Communicator support
F. instant messaging support
Answer: BCF
QUESTION 137
Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU?
A. Static
B. Network ip
C. Xconfig network address
D. Xconfig network address
Answer: A
QUESTION 138
A user needs to access CAR logs to adjust settings. Which two options are required? (Choose two.)
A. The user account has the Standard CAR Admin Users role.
B. The user must log in at https://:8443/car/Logon.jsp.
C. The user must log in at https://:8443/cdr/Logon.jsp.
D. The user account has the CTI Enabled role.
E. The user account has the Standard CAR role.
Answer: AB
QUESTION 139
Where can an engineer find how many unused Cisco Unified Workspace Licensing Standard licenses remain?
A. CAR
B. Cisco Unified Reporting
C. Cisco Unified Communications Enterprise License Manager
D. RTMT
Answer: C
QUESTION 140
Which CAR module report provides key information to determine if an additional gateway is needed?
A. gateway utilization
B. gateway summary
C. gateway detail
D. gateway and line group utilization
Answer: A
QUESTION 141
Refer to the exhibit. Which method is using the users to access their mailboxes?
A. web access
B. phone access
C. GUI access
D. VUI access
Answer: B
QUESTION 142
A voice engineer wants to monitor system activities using the RTMT tool.
Which step is next after navigating to Cisco Unified Reporting?
A. system > scheduler > CDR
B. system reports > unified CM data summary > generate report
C. system > tools > reports
D. tools > CDR analysis and reporting
Answer: B
QUESTION 143
An engineer receives a report that Cisco Unified Communications Manager is not responding. The engineer needs to use RTMT to check errors. Which menu path should the engineer follow to install RTMT?
A. System Settings > Plugins > RTMT
B. Unified Communications Serviceability > Downloads > RTMT
C. Application > Plugins > RTMT
D. System > Plugins > RTMT
Answer: C
QUESTION 144
Which option in RTMT would be used to monitor connections using Cisco Unity Connection?
A. Port Monitor
B. Called Party Tracing
C. System Summary
D. Trace and Log Central
Answer: A
QUESTION 145
An administrator has been deleting phones from Cisco Unified Communications Manager, but would like to reassign those directory numbers. Which two configuration areas within Cisco Unified Communications Manager allow the administrator to perform this task? (Choose two.)
A. directory number
B. route plan report
C. dial rules
D. intercluster directory URI
E. dial plan installer
Answer: AB
QUESTION 146
On the PSTN gateway, a network engineer runs sh isdn status and finds the Layer 2 state of each interface to be “TEI_ASSIGNED”. What is the status of PSTN connectivity from this gateway?
A. The T1 interfaces are established and operational.
B. This information does not indicate the status of PSTN connectivity from the gateway.
C. The T1 interfaces are down.
D. The T1 interfaces are being tested by the carrier.
Answer: C
2018 More new 210-060 Practice Tests can be viewed here: https://drive.google.com/drive/folders/0B75b5xYLjSSNcHNlT3VrNy1CbUU?usp=sharing
More new 210-060 Practice Questions:
QUESTION 136
A Cisco Unified Communications administrator wants to implement Cisco IM and Presence for the company. If it is installed in IM-only user mode, which three services are supported for users? (Choose three.)
A. video calls support
B. third-party XMPP client support
C. presence support
D. Microsoft Lync support
E. Microsoft Office Communicator support
F. instant messaging support
Answer: BCF
QUESTION 137
Which CLI command must be used to configure the network settings on a Cisco TelePresence 4500 MCU?
A. Static
B. Network ip
C. Xconfig network address
D. Xconfig network address
Answer: A
QUESTION 139
Where can an engineer find how many unused Cisco Unified Workspace Licensing Standard licenses remain?
A. CAR
B. Cisco Unified Reporting
C. Cisco Unified Communications Enterprise License Manager
D. RTMT
Answer: C
QUESTION 140
Which CAR module report provides key information to determine if an additional gateway is needed?
A. gateway utilization
B. gateway summary
C. gateway detail
D. gateway and line group utilization
Answer: A
QUESTION 141
Refer to the exhibit. Which method is using the users to access their mailboxes?
A. web access
B. phone access
C. GUI access
D. VUI access
Answer: B
QUESTION 142
A voice engineer wants to monitor system activities using the RTMT tool.
Which step is next after navigating to Cisco Unified Reporting?
A. system > scheduler > CDR
B. system reports > unified CM data summary > generate report
C. system > tools > reports
D. tools > CDR analysis and reporting
Answer: B
QUESTION 143
An engineer receives a report that Cisco Unified Communications Manager is not responding. The engineer needs to use RTMT to check errors. Which menu path should the engineer follow to install RTMT?
A. System Settings > Plugins > RTMT
B. Unified Communications Serviceability > Downloads > RTMT
C. Application > Plugins > RTMT
D. System > Plugins > RTMT
Answer: C
QUESTION 144
Which option in RTMT would be used to monitor connections using Cisco Unity Connection?
A. Port Monitor
B. Called Party Tracing
C. System Summary
D. Trace and Log Central
Answer: A
QUESTION 145
An administrator has been deleting phones from Cisco Unified Communications Manager, but would like to reassign those directory numbers. Which two configuration areas within Cisco Unified Communications Manager allow the administrator to perform this task? (Choose two.)
A. directory number
B. route plan report
C. dial rules
D. intercluster directory URI
E. dial plan installer
Answer: AB
QUESTION 146
On the PSTN gateway, a network engineer runs sh isdn status and finds the Layer 2 state of each interface to be “TEI_ASSIGNED”. What is the status of PSTN connectivity from this gateway?
A. The T1 interfaces are established and operational.
B. This information does not indicate the status of PSTN connectivity from the gateway.
C. The T1 interfaces are down.
D. The T1 interfaces are being tested by the carrier.
Answer: C