Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 and a domain controller named
DC2.All servers run Windows Server 2016 R2. All domain controllers are configured as DNS servers.
On Server1, you open Server Manager and you add DC2 as another server to manage.
From Server Manager on Server1, you right-click DC2 as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that when you right-click DC2, you see the option to run DNS Manager.
What should you do?
A.
On Server1, install the Role Administration Tools.
B.
In the domain, add Server1 to the DNS Admins group.
C.
On DC2 and Server1, run winrmquickconfig.
D.
On DC2, install the Feature Administration Tools.
Explanation:
The Domain Name System (DNS) role is a role that provides a standard method for associating names with numeric Internet addresses. This lets users refer to
network computers by using easy-to-remember names instead of a long series of numbers. Windows DNS services can be integrated with DHCP services,
eliminating the need to add DNS records as computers are added to the network.
There are some fake questions, I think “2012” was simply replaced by “2016” in all of the questions
Agree and there are some questions where they have mentioned OS is “Windows Server 2016 R2” which does not even exist.
D
Nope, RSAT tools required to be installed on Server1 only
A is not totally correct but make more sense because you need only install dns manager tools feature. Not role DNS.
Answer A.
Explanation:
You need to install the feature administrations tools for the DNS.
Need to install DNS management tools onServer1 then you will have access to DNS management
Passed today with high scores and here are some real questions:
QUESTION 1
Hotspot Question
You have a server named Served that runs Windows Server 2016.
Server1 has the Windows Application Proxy role service installed.
You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
Answer:
QUESTION 2
Your network contains three Hyper-V hosts.
You add all of the hosts to a cluster.
You need to create highly available storage spaces that connect to directly attached storage on the hosts.
Which cmdlet should you use?
A. Enable-Cluster Storage Spaces Dired
B. Set-Storage Pool
C. Add-Cluster Disk
D. Update-Cluster Virtual Machine Configuration
Answer: A
Explanation:
The Enable-ClusterStorageSpacesDirect cmdlet enables highly available Storage Spaces that use directly attached storage Storage Spaces Direct (S2D) on a cluster.
QUESTION 3
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first node cluster of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.
Answer:
QUESTION 4
You have an application named App1.
App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.
What should you include in the environment?
A. Network Controller and Windows Server Network Load Balancing (NLB) nodes
B. Network Controller and Windows Server Software Load Balancing (SLB) nodes
C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
D. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
Answer: D
QUESTION 5
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2016.
All of the offices are connected by high speed, low latency WAN links.
You need to ensure that you can use QoS policies for Live Migration traffic between the offices.
Which component should you install?
A. the Multipath I/O feature
B. the Routing role service
C. the Network Controller server role
D. the Canary Network Diagnostics feature
E. the Data Center Bridging feature
Answer: CE
QUESTION 6
Hotspot Question
You have an Active Directory domain named Contoso com.
The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have four virtual machines that are connected to an external switch.
The virtual machines are configured as shown.
To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area
Answer:
QUESTION 7
You have a server named Server1 that runs Windows Server 2016.
Server1 is a Hyper-V host that hosts a virtual machine named VM1.
Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1.
What should you do?
A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.
C. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
D. From the properties of the NIC team on VM1. change the load balancing of the NIC team.
Answer: A
QUESTION 8
Hotspot Question
You have a machine named VM1 that runs Windows Server 2016 VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network. Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
Answer:
QUESTION 9
Hotspot Question
You have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host. You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) – capable.
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards.
Which command should you run first? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Create a Hyper-V Virtual Switch with SET and RDMA vNICs
To make use of RDMA capabilies on Hyper-V host virtual network adapters (vNICs) on a Hyper-V Virtual Switch that supports RDMA teaming, you can use this example Windows PowerShell script.
#
# Create a vmSwitch with SET
#
New-VMSwitch -Name SETswitch -NetAdapterName “SLOT 2″,”SLOT 3” -EnableEmbeddedTeaming $true
#
# Add host vNICs and make them RDMA capable
#
Etc.
Note: As New-VmSwitch is not an alternative, we choose the Add-VMSwitch command instead. Thee Add-VmSwitch command does not have -NetAdapter and -EnableEmbeddedTeaming parameters.
QUESTION 10
You have a server named Server1 that runs Windows Server 2016.
You need to configure Server1 as a multitenant RAS Gateway.
What should you install on Server1?
A. the Network Policy and Access Services server role
B. the Remote Access server role
C. the Data Center Bridging feature
D. the Network Controller server role
Answer: B
Follow my blog to get all the new updated questions: http://www.passpmp.net/category/microsoft/70-743-dumps
I have uploaded all the real questions of 70-743 exam to my Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDdjVzVlJxOXB5TTg
Welcome to download them freely!
QUESTION 152
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Data Exchange integration service for VM1.
Does this meet the goal?
A. YES
B. NO
Answer: A
QUESTION 153
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2.
Does this meet the goal?
A. Yes
B. No
Answer: B
Explanation:
https://blogs.technet.microsoft.com/mempson/2007/11/08/how-to-find-out-who-has-your-fsmo-roles/
QUESTION 154
You have a Scale-Out File Server that has a share named Share1.
Share1 contains a virtual disk file named Disk1.vhd.
You plan to create a guest failover cluster.
You need to ensure that you can use the virtual disk as a shared virtual disk for the gust failover cluster.
Which cmdlet should you use?
A. Optimize VHD
B. Optimize VHDSet
C. Convert-VHD
D. Set-VHD
Answer: A
QUESTION 155
Scenario:
You are a network administrator for a company named Contoso,Ltd.
The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
* Network address translation (NAT)
* The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
You add a computer to subnet1. The computer has an IP address of 10.10.0.129
Web1 receives a request from the new computer and sends a response.
What should you do?
A. 10.10.0.129
B. 10.10.0.224
C. 131.107.0.223
D. 172.16.128.222
Answer: A
QUESTION 156
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You start the Hyper-V Guest Service Interface service on VM1.
Does this meet the goal?
A. YES
B. NO
Answer: A
QUESTION 157
You plan to deploy several Hyper-V hosts that run Windows Server 2016.
The deployment will use Software defined Networking (SDN) and VXLAN.
Which server role should you install on the network to support the planned deployment?
A. Network Controller
B. Network Policy and Access Services
C. Remote Access
D. Host Guardian Service
Answer: D
QUESTION 158
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to
18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, you modify the Network Policies on Server1.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION 159
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host.
The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage Edition Datacenter DeploymentType Host Package Mictosoft- NanoServer-SCVMM-Package MediaPath `D:\ -TargetPath C:\nano1\Nano1.wim ComputerName Nano1 Domaintiame Contoso.com
Does this meet the goal?
A. Yes
B. NO
Answer: A
QUESTION 160
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage Edition Datacenter DeploymentType Host Package Microsoft- NanoServer-Compute-Package MediaPath `D:\’ TargetPath C:\Nano1\Nano1.wim ComputerName Nano1 DomainName Contoso.com
Does this meet the goal?
A. Yes
B. NO
Answer: A
QUESTION 161
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server.
Server1 is configured to allow domain users to establish VPN connections from 06:00 to
18:00 everyday of the week.
You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Routing and Remote Access, you configure the Properties of Server1.
Does this meet the goal?
A. Yes
B. No
Answer: B
QUESTION 162
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host.
The windows server 2016 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage Edition Datacenter DeploymentType Most Compute Media `D:\’ TargetPath c:\Nano1\Nano1.wim ComputerNamae Nano1 DomainName Contoso.com
Does this meet the goal?
A. Yes
B. NO
Answer: B
QUESTION 163
Scenario:
You are a network administrator for a company named Contoso,Ltd.
The network is configured as shown in the exhibit.
You install the Remote Access server role on Server2.
Server2 has the following configured.
* Network address translation (NAT)
* The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2.
End of Scenario:
What should you do to meet the DHCP connectivity requirement for Subnet2?
A. Install the Routing role service on Server2.
B. Install the IP address Management (IPAM) Server feature on Server2.
C. Install the Routing role service on Server1.
D. Install the DHCP Server server role on Server1.
Answer: A
QUESTION 164
Hotspot Question
You install the DHCP Server role on a server1.
You create a new scope on Server1.
The scope properties are configured as shown in the following exhibit.
Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphics.
Answer:
QUESTION 165
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers.
The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range.
A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network.
You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network
Which cmdlet should you use?
A. New-NetNeighbor
B. New-NetRoute
C. Set-NetTcpSetting
D. Set-NetNeighbir
Answer: B
QUESTION 166
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the DFS Replication role service, and then you start the Network Connections service.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION 167
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1.
Server1 and VM1 run Windows Server 2016.
The settings for VM1 are configured as shown in the exhibit below.
You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1.
Solution: You need to enable the Guest Service integration service for VM1.
Does this meet the goal?
A. YES
B. NO
Answer: A
QUESTION 168
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com.
The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service.
Does this meet the goal?
A. Yes
B. No
Answer: B
QUESTION 169
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2016.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?
A. Yes
B. No
Answer: A
QUESTION 170
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet.
Your company has the following policy for allocating IP addresses:
All server addresses must be excluded from DHCP scopes. All client computer must receive IP addresses from Scope1. All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240.
All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199.
You deploy a print device named Print1.
You need to ensure that Print1 adheres to the policy for allocating IP addresses.
Which command should you use?
A. Add-DhcpServerv4Lease
B. Add-DhcpServerv4ExclusionRange
C. Add-DhcpServerv4Filter
D. Add-DhcpServerv4Reservation
Answer: B