Which of the following is TRUE with regards to connecti…

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com
network have windows Server 2016 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has two physical disks installed. The C: drive hosts the boot partition, while the D: drive is not
being used. Both disks are online.
You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequent to creating the virtual machine, you have to connect the D: drive to
the virtual machine.
Which of the following is TRUE with regards to connecting a physical disk to a virtual machine?

You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com
network have windows Server 2016 R2 installed.
Contoso.com has a server, named ENSUREPASS-SR07, which has two physical disks installed. The C: drive hosts the boot partition, while the D: drive is not
being used. Both disks are online.
You have received instructions to create a virtual machine on ENSUREPASS-SR07. Subsequent to creating the virtual machine, you have to connect the D: drive to
the virtual machine.
Which of the following is TRUE with regards to connecting a physical disk to a virtual machine?

A.
The physical disk should not be online.

B.
The physical disk should be uninstalled and re-installed.

C.
The physical disk should be configured as a striped disk.

D.
The physical disk should be configured as a mirrored disk.

Explanation:
Your virtual machines can also be connected to physical hard disks on the virtualization server virtual hard disks. (This is sometimes referred to as having a “passthrough” disk connected to a virtual machine.)
The physical hard disk that you connect to a virtual machine can also be a network-attached disk, like a logical unit number (LUN) in a storage area network (SAN).
A common example is an iSCSI LUN that has been mapped to the virtualization server by using Microsoft iSCSI Initiator. Because the virtualization server sees

network-attached storage as local disks, the iSCSI LUN can be connected to a virtual machine.
The most important limitation about having a physical hard disk connected to a virtual machine is that it cannot be connected to the virtualization server or to other
virtual machines at the same time. The virtual machine must have exclusive access to the physical hard disk.
Pass-through Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the Hyper-V server without requiring the volume be
configured. The storage can either be a physical disk internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to the
Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an Offline state from the Hyper-Vserver perspective.



Leave a Reply 4

Your email address will not be published. Required fields are marked *


Madalina Ella

Madalina Ella

[Update]

New 70-743 Exam Questions and Answers Updated Recently (22/Feb/2017):

NEW QUESTION 73
You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016. You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies. Which component must you install for the planned deployment?

A. the Routing role service
B. the Canary Network Diagnostics feature
C. the Network Controller server role
D. the Data Center Bridging feature

Answer: C
Explanation:
Using Windows PowerShell, the REST API, or a management application, you can use Network Controller to manage the following physical and virtual network infrastructure:
* Datacenter Firewall
This Network Controller feature allows you to configure and manage allow/deny firewall Access Control rules for your workload VMs for both East/West and North/South network traffic in your datacenter. The firewall rules are plumbed in the vSwitch port of workload VMs, and so they are distributed across your workload in the datacenter. Using the Northbound API, you can define the firewall rules for both incoming and outgoing traffic from the workload VM. You can also configure each firewall rule to log the traffic that was allowed or denied by the rule.
* Hyper-V VMs and virtual switches
* Remote Access Service (RAS) Multitenant Gateways, Virtual Gateways, and gateway pools
* Load Balancers
References: technet.microsoft.com/en-us/library/dn859239.aspx

NEW QUESTION 74
You have a virtual machine named VM1 that runs Windows Server 2016. VM1 hosts a service that requires high network throughput. VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RMDA), the single root I/O virtualization (SR-IOV) interface, Quality of Service (QoS), and Receive Side Scaling (RSS). You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run in the host of VM1?

A. Set-NetAdapterRss
B. Set-NetAdapterRdma
C. Set-NetAdapterSriov
D. Set-NetAdapterQoS

Answer: A
Explanation:
The Set-NetAdapterRss cmdlet sets the receive side scaling (RSS) properties on a network adapter. RSS is a scalability technology that distributes the receive network traffic among multiple processors by hashing the header of the incoming packet. Without RSS Windows Server 2012/2016; network traffic is received on the first processor which can quickly reach full utilization limiting receive network throughput. Many properties can be configured using the parameters to optimize the performance of RSS. The selection of the processors to use for RSS is an important aspect of load balancing. Most of the parameters for this cmdlet help to determine the processors used by RSS.

NEW QUESTION 75
You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3. You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.)
Image URL: examgod.com/plimages/bd9af8d3b672_A34A/passleader-70-743-dumps-751.jpg
You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1. What should you do?

A. From Hyper-V Manager on Server1, modify the settings of VM1.
B. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
C. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
D. From Windows PowerShell on Server1, run the Set-VmSwitch cmdlet.

Answer: B
Explanation:
The Set-VmNetworkAdapterTeamMapping cmdlet will establish an affinity between virtual NIC (vNIC or vmNIC) and a team member. If the physical NIC encounters any issue, the affinitized vNIC or vmNIC will failover to another team member.

NEW QUESTION 76
You have a server named Server1 that runs Windows Server 2016. You plan to deploy Internet Information Services (IIS) in a Windows container. You need to prepare Server1 for the planned deployment. Which three actions should you perform? Each correct answer presents part of the solution.

A. Install the Container feature.
B. Install Docker.
C. Install the Base Container Images.
D. Install the Web Server role.
E. Install the Hyper-V server role.

Answer: ABC
Explanation:
Step 1 (A): The container feature needs to be enabled before working with Windows containers. To do so run the following command in an elevated PowerShell session.
Enable-WindowsOptionalFeature -Online -FeatureName containers -All
Step 2 (B): Docker is required in order to work with Windows containers.
Note: First install the OneGet PowerShell module.
Install-Module -Name DockerMsftProvider -Repository PSGallery -Force Next you use OneGet to install the latest version of Docker.
Install-Package -Name docker -ProviderName DockerMsftProvider
Step 3 (C): Install Base Container Images
Windows containers are deployed from templates or images. Before a container can be deployed, a container base OS image needs to be downloaded. The following commands will download the Nano Server base image.
Pull the Nano Server base image.
docker pull microsoft/nanoserver

NEW QUESTION 77
Your network contains an Active Directory domain. The domain contains two Hyper-V hosts. You plan to perform live migrations between the hosts. You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

A. From Server Manager, install the Host Guardian Service server role on a domain controller.
B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
D. From Server Manager, install the Host Guardian Service server role on both servers.

Answer: C
Explanation:
If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps. To configure constrained delegation:
– Open the Active Directory Users and Computers snap-in.
– From the navigation pane, select the domain and double-click the Computers folder.
– From the Computers folder, right-click the computer account of the source server and then click Properties.
– In the Properties dialog box, click the Delegation tab.
– On the delegation tab, select Trust this computer for delegation to the specified services only. Under that option, select Use Kerberos only.

NEW QUESTION 78
Hotspot Question
You have a four-node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1. VM1 has a network adapter that connects to a virtual switch named Network1. You need to prevent a network disconnection on VM1 from causing VM1 to move to another cluster node. What command should you run? To answer, select the appropriate options in the answer area.
Image URL: examgod.com/plimages/bd9af8d3b672_A34A/passleader-70-743-dumps-781.jpg

Answer:
Image URL: examgod.com/plimages/bd9af8d3b672_A34A/passleader-70-743-dumps-782.jpg
Explanation:
The Set-VMNetworkAdapter cmdlet configures features of the virtual network adapter in a virtual machine or the management operating system. The Set-VMNetworkAdapter cmdlet parameter -IovInterruptModeration specifies the interrupt moderation value for a single-root I/O virtualization (SR-IOV) virtual function assigned to a virtual network adapter. Allowed values are Default, Adaptive, Off, Low, Medium, and High. If Default is chosen, the value is determined by the physical network adapter vendor’s setting.

NEW QUESTION 79
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1, Server2 and Server3 that run Windows Server 2016. Server1 and Server2 are nodes in a Hyper-V cluster named Cluster1. You add a Hyper-V Replica Broker role named Broker1 to Cluster1. Server3 is a Hyper-V server. A virtual machine named VM1 runs on Server3. Live Migration is enabled on all three servers and it is configured to use Kerberos authentication only. You need to ensure that you can perform the migration of VM1 to Server2. What should you do?

A. Add the Server computer account to the Replicator group on Server1 and Server2.
B. Modify the Delegation settings on the Server3 computer account.
C. Modify the Storage Migration settings on Server3.
D. Modify the Cluster permissions for Cluster1.

Answer: B
Explanation:
If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps. To configure constrained delegation:
– Open the Active Directory Users and Computers snap-in. For example, to do this from Server Manager, select the server if it not already selected. After the server is selected, click Tools, and then click Active Directory Users and Computers. This opens the Active Directory Users and Computers snap-in.
– From the navigation pane, select the domain and double-click the Computers folder.
– From the Computers folder, right-click the computer account of the source server and then click Properties.
– In the Properties dialog box, click the Delegation tab.
– On the delegation tab, select Trust this computer for delegation to the specified services only. Under that option, select Use Kerberos only.
– Click Add.
Etc.
References: technet.microsoft.com/en-us/library/jj134199(v=ws.11).aspx

NEW QUESTION 80
…..

P.S. These New 70-743 Exam Questions Were Just Updated From The Real 70-743 Exam, You Can Get The Newest 70-743 Dumps In PDF And VCE From — http://www.passleader.com/70-743.html (97q VCE and PDF)

Good Luck!

Daniel Rücker

Daniel Rücker

(1/Dec/2017 Updated) New 70-743 Exam Questions:

NEW QUESTION 148
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin. The London site contains a web server named Web1 that runs Windows Server 2016. You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 149
You are implementing a new network. The network contains a DHCP server named DHCP1 that runs Windows Server 2016. DHCP1 contains a scope named Scope1 for the 192.168.0/24 subnet. Your company has the following policy for allocating IP addresses:
– All server addresses must be excluded from DHCP scopes.
– All client computer must receive IP addresses from Scope1.
– All Windows servers must have IP addresses in the range of 192.168.0.200 to 192.168.0.240.
– All other network devices must have IP addresses in the range of 192.168.0.180 to 192.168.0.199.
You deploy a print device named Print1. You need to ensure that Print1 adheres to the policy for allocating IP addresses. Which command should you use?

A. Add-DhcpServerv4Lease
B. Add-DhcpServerv4ExclusionRange
C. Add-DhcpServerv4Filter
D. Add-DhcpServerv4Reservation

Answer: B

NEW QUESTION 150
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After your answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. You need to identify which server is the schema master.
Solution: From Windows PowerShell, you run Get-ADDomainController -Discover -Service 2 cmdlet.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 151
You have a Scale-Out File Server that has a share named Share1. Share1 contains a virtual disk file named Disk1.vhd. You plan to create a guest failover cluster. You need to ensure that you can use the virtual disk as a shared virtual disk for the gust failover cluster. Which cmdlet should you use?

A. Optimize VHD
B. Optimize VHDSet
C. Convert-VHD
D. Set-VHD

Answer: A

NEW QUESTION 152
You plan to deploy several Hyper-V hosts that run Windows Server 2016. The deployment will use Software Defined Networking (SDN) and VXLAN. Which server role should you install on the network to support the planned deployment?

A. Network Controller
B. Network Policy and Access Services
C. Remote Access
D. Host Guardian Service

Answer: D

NEW QUESTION 153
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Network Policy Server, you modify the Network Policies on Server1.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 154
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The Windows Server 2016 source files are located in Drive D.
Solution: You run the following cmdlet:
New-NanoServerImage -Edition Datacenter -DeploymentType Host -Package Microsoft-NanoServer-SCVMM-Package -MediaPath D:\ -TargetPath C:\Nano1\Nano1.wim -ComputerName Nano1 -Domainname contoso.com
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 155
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a server named Server1 that runs Windows Server 2016. Server1 is configured as a VPN server. Server1 is configured to allow domain users to establish VPN connections from 06:00 to 18:00 everyday of the week. You need to ensure that domain users can establish VPN connections only between Monday and Friday.
Solution: From Routing and Remote Access, you configure the Properties of Server1.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 156
Your network contains three subnets, a production subnet that contains production servers, a development network that contains development servers, and a client network that contains client computers. The development network is used to test applications and reproduces servers that are located on the production network. The development network and the production network use the same IP address range. A developer has a client computer on the client network. The developer reports that when he attempts to connect to the IP address 10.10.1.6 from his computer, he connects to a server on the production network. You need to ensure that when the developer connects to 10.10.1.6, he connects to a sever on the development network. Which cmdlet should you use?

A. New-NetNeighbor
B. New-NetRoute
C. Set-NetTcpSetting
D. Set-NetNeighbir

Answer: B

NEW QUESTION 157
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin. The London site contains a web server named Web1 that runs Windows Server 2016. You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the DFS Replication role service, and then you start the Network Connections service.
Does this meet the goal?

A. Yes
B. No

Answer: A

NEW QUESTION 158
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin. The London site contains a web server named Web1 that runs Windows Server 2016. You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the BranchCache feature, and then you start the BranchCache service.
Does this meet the goal?

A. Yes
B. No

Answer: B

NEW QUESTION 159
……

P.S. Get The Newest 70-743 Dumps In PDF And VCE From — https://www.passleader.com/70-743.html (187q VCE and PDF)

Good Luck!